pneumatic stainless steel mini cylinder
| Min. Order: | 1 Piece/Pieces |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | T/T, WU |
| Supply Ability: | 50000pieces per month |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Ningbo, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Pneumatic Valve, Cylinder, Air Treatment, Fitting, Tube |
Product Detail
| Model No.: | TGL20*100 |
|---|---|
| Means of Transport: | Ocean, Air |
| Brand Name: | STNC |
| bore size: | 8mm -25mm |
| action: | double action/single action/adjustable action |
| medium: | air |
| pressure range: | 0.1 - 0.9MPa |
| temperature range: | -10 ~60 ℃ |
| proof pressure: | 1.35MPa |
| speed range: | 50~800mm/s |
| Production Capacity: | 50000pieces per month |
| Packing: | carton box/wooden box/pallet |
| Delivery Date: | 10 days againest payment |
Product Description
Standard Specification
| Bore(mm) | 8 | 10 | 12 | 16 | 20 | 25 |
| Action | Double Acting Type | |||||
| Applicable Medium | Air | |||||
| Pressure Range | 0.1 - 0.9 MPa | |||||
| Proof Pressure | 1.35 Mpa | |||||
| Temperature Range | .-10 - 60℃ | |||||
| Speed Range | 50 - 800mm/s | |||||
| Cushion Type | Adjustable Cushion | |||||
| Cushion Stroke(mm) | 24mm | 32mm | ||||
| Port Size | G1/8 | G1/4 | G3/8 | G1/2 | ||
Figure Dimension
Cylinder Installation Instructions
1. Before installation, be sure if the cylinder was not damaged during transportation. Check if connecting parts were looose, etc.
2. When installation, the cylinder piston rod shall not withstand eccentric or radial loads, the load must be consistent with the
direction of piston rod axis.
3. When cylinder installation, especially for long stroke cylinder, it must use level instrument for three-point position calibration.
4. Before the pipe connects into air inlet, the inner pipe should be clean, without any corrosion.
5. Speed adjustment: firstly adjust speed control valve in the middle, gradually adjust the output pressure of regulator, when cylinder
speed is close to pre-determine speed, it can ascertain working pressure, and adjust speed control valve slightly,finally adjust the
cushion speed(usually the cushion speed is adjusted in the factory)
6. After cylinder installation, in working pressure range, to operate 2-3 times without load, checking cylinder whether can work normally
7. Under high temperature or corrosive conditions, it should use high temperature resistance and corrosion resistance cylinder
8. In the occasions of high humidity, large dust or water drop, welding slag, cylinder should be protected with devices
9. In low-temperature environment, it should take antifreeze measure to prevent water freezing in system
10.If the cylinder is not used for long time, pay attention to the surface oxidation, the inlet and outlet ports should be protected by plug
About Shippment
For order value less than usd 2000, we will make the delivery by express
For order value more than usd 2000, we can make the deliery as your request
Guarantee for long lefetime
Guarantee for short delivery time
Free sample will be supplied for testing
Why Choose Us
