Ultra- Stable White Chip Resetter Compatible Reset Epson 4900 / 4910 Printer Cartridge Chip 100% com

Ultra- stable /  High Capacity Printer Chip Resetter Compatible for Epson 4900 / 4910 100% compatible 

Product Advantages:

1. Best selling item!

2. Low cost: with chip resetter, the original cartridge could be used repeatedly, save printing cost a lot.

3. High capacity ,more economical.

4. High quality control.

5. Excellent printing result all the time.

6. 100% quality guaranteed and warranty.

Chips, chip resetters and ink level resetting...                                                                         

Take a look at just about any ink cartridge these days and you'll probably find a small integrated circuit board, attached to it somewhere. It is usually green in colour, with few gold plated electrical contacts. This is the cartridge chip.

When a "chipped" ink cartridge is installed in printer, the chip is lined up against an array of pins that connect it into the printer's electronic circuitry. The main function of the chip is to identify the ink cartridge (it's attached to) to the printer. It can store all sorts of other information as well, including estimated ink level, installation and expiry date etc. The ink level data is progressively re-written as the ink gets used up. And when the chip reaches certain ink level (5-15%), some printers are programmed to grind to a halt and display "ink may have run out" or "cartridge not recognised" error.

Ok...this may seem like a good feature. It's handy to know how much ink you have left and for the printer to warn you, before it runs out (of ink). True...but what if you want to refill the ink cartridge or use up the remaining ink?

While some printers can be forced to print again - by overriding the ink monitor, some simply stop and refuse to work until the 'offending' ink cartridge/tank is replaced - or reset using a chip resetter.   
 

What can you do about ink chips ?
 

How the ink level monitoring is achieved, how the information is stored, how it affects you and what you can do about it - depends on what printer make and model you have...and what is currently available for it.

How to Reset the cartyridge chips 
 

Method of Application:

1. Fit the chip to the groove of chip resetter, enable the probe of chip resetter well touch with the contactor on the chips.

2. Press the 2 components together, if the red light gleams, it means the connection is fine.
3. 5 seconds later, the red light turns to green it means the chip data has been recover.

4. Refill inks or other brand compatible ink, the cartridge could be used again.

Fullcolor chip resetter fundamentally decode the circuit of ink system, use chip to simulate the cartridge data, after decoding, each color of ink shows 100% ink volume.

Contropose to the high cost of Epson 4900/4910 original cartridges, we have developed chip resetters which can identify the original chips and reset it automatically for reuse.

The one time resettable chips for Epson 4900 and 4910 printers are also available, which also can be resetted by this resetter, stable and reliabel, save cost up to 90%.

Picture of Maintenance Tank Chip Resetter:

any print question and any item you are interest pls contact us when you feel free :

Tel:86-769 86093099
email:skyzhang@dgfullcolor.com
msn:fullcolor108@hotmail.com
skype:Fcolor108
whatsapp:+8615015164529
QQ:656414656