Industrial Steam Trolley used for carrying cakes into and out of autoclave

Steam Trolley used for carrying cakes into and out of autoclave

a)  Uses

The curing trolley (see the picture) is special vehicle for shipping during the production. It is used to load 

the billet after cutting to the autoclave for curing, and then move to finished goods site, and it will load the 

billet to autoclave

after being unloaded.

b)  Main Technical Parameter

1, Max size

Length:6340mm    Width:1495mm    Height:300mm

2, Weight:827kg

3, Diameter of the wheel :260mm

4, Bolster bearing:80mm

Bearing The temperature resistant of the lubricant oil 200

c)  Structure

The curing trolley is composed of 2 main parts, frame and the wheel.

1. The frame is made of steel panel with good steel and easy structure.

2. The wheel is composed of vehicle, shaft and bearing, the rolling is very flexible and stable.

3. It has good decoupling shaft.

d)  Work Principles

The bottom of the trolley is loaded billets cutting by the 2 mould. Attention: It should add washer to make sure it is flat between the frame and the floor surface, to avoid the frame to lean.

The trolley runs stably on the guide and the trolley is connected by the hook, the trolley then goes to the autoclave to cure the billet and move the billets to the finished goods site, and then the decouple will unload the hook.

e)   Quick-wear parts

Bearing            6314           2PC