Place of Origin: | Zhejiang |
---|
Location: | Shenzhen, Guangdong, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | High Bay LED Light, Industrial LED High Bay Lighting, Cree LED High Bay |
Model No.: | SP-COB-XN-30W |
---|
Natural White 4000K LED Downlight COB With CE ROHS SAA standard
30W COB Recessed LED Downlight Features:
Quick Detail:
Power : 30W
Voltage : AC85-265V
Chips Brand : Epistar
LED : COB LED
Size : 8inch
Cut Out : 210mm
Certification : CE / ROHS
Body material : Aluminum
Dimmable : Available
CRI : 70-85RA
30W COB Recessed LED Downlight Specification
Product Model |
SP-COB-XN-30W |
Input voltage |
AC85-265V |
Freqency Range |
50/60Hz |
Housing material |
Aluminum body |
Led Consumption |
30 Wattage |
System Consumption |
32 Wattage |
LED Brand |
Epistar Chips |
Chips quantity |
150PCS Chips |
Luminous flux |
2500-2800LM |
Color temperature |
2500-10000K |
Color Rendering Index |
>70 RA |
Emitting angle |
120° |
Size |
D230xH75mm |
Working Temperature |
-40 +55 |
Lifetime |
50000 Hours |
Certificate |
CE/ROHS |
Cut out |
210mm |
Quality guarantee |
3 Years |
Waterproof class |
IP44 |
30W COB Parameter
COB Power | 30w | |
PCB Material | PCB Material / Ceramics | |
Chips Brand | Epistar 28*14mil | |
Chips Quantity | 150PCS | |
Color Rendering Index | >80 | |
Output Voltage | 30-33VDC | |
Current | 900MA |
30W Driver Parameter
Input Voltage | AC85-265V | |
Output Voltage | 30-42VDC | |
Input Current | 0.17-0.5A | |
Output Current | 900MA | |
Power Factor | >0.9 | |
Certification | CE / ROHS / SAA / ETL | |
Dimmable | Triac / 0-10V |
30W COB Recessed LED Downlight Dimension
30W COB Recessed LED Downlight Packing
Model |
SP-COB-XN-30W |
Net Weight |
0.8KG |
Inner box size |
33x26x9CM |
Outter carton size |
40x38x43CM |
Carton G.w |
1.2kg |
Pcs/carton |
10pcs |
Inatallation instructions Recessed LED Downlights
1. Switch off the power.
2. Ensure that the void depth is a minimum of 90mm, the thickness of ceiling is a maximum of 20mm.
3. Cut a hole using an appropriate tool according to the cut-out.
4. Connect the wire of the driver to mains(85-265v)in a correct way,put the driver into the ceiling properly.
5. Push the spring clips upwards and fit into ceiling hole, ensure the product is sitting properly in hole.
6. Screw lighting engine as shown in figure 5 and 6, and install reflector and frame.
7. Switch on the power if above steps done properly without any mistakes.