60KW High Power Plastic Extruder Machine For PMMA or Acrylic Bar / Rod 30mm-120mm

Plastic Extruder Machine For PMMA or Acrylic Bar  /  Rod  ( 30mm-120mm )

PMMA or Acrylic Bar Extruder Machine / production line ( 30mm-120mm) is used to produce the PMMA Bar and Acrylic Bar.

PMMA Bar and Acrylic Bar is also the organic glass rod,because the impact resistant ability,good plasticity and easy recycled,it is widely used for construction and decoration.

Plastic Extruder Machine For PMMA or Acrylic Bar  /  Rod  ( 30mm-120mm ) Introduction:

1. Total installed power:60Kw, 380 V three phases+N+G, 50HZ

2. Cooling circulars water: 5 m3/h

3. Compress air:0.3m3/min

4. Workhouse: 20000×2000×2400mm(length, width and high of line) 

5. Products dimension: 30mm,38mm,50mm,60mm,80mm,100mm,120mm diameter.

6. Raw material :PMMA

7.Max Output:120 kg per hour 

Plastic Extruder Machine For PMMA or Acrylic Bar  /  Rod  ( 30mm-120mm ) Machinery Specification:

1. Automatic Feeder and drying hopper

2. 65X35 Vented Single Screw Extruder 

    25X25 Vented Single Screw Extruder

3. Die head

4. Water cooling tank

5. Belt haul-off unit

6. Non scrap Cutting unit:

7. Stack unit

8. Electric Control Cabinet

Technology and Service:

1. Seller supply full set of technical document, cutter and other full document (write in English).  

2. Seller supply training for buyer’s staff until buyer can produce the eligible production independently.  

3. Seller is responsible for installing, testing, adjusting and debugging the machines in buyer’s factory.

4. Buyer should pay the expense for our engineers including for our engineer including round-

way tickets, inland traffic, lodging and boarding fee when the machine is installed, tested and maintained.

5. Seller will go to install machines after the machine is arrived at buyer and buyer will have prepared all 

conditions (including power, water, compress air, tools and materials for producing pipe, etc) for installing 

and testing these machines. Buyer should pay 60USD/day.

6. When installing,people of both sides cooperate well and carefully,buyer supplies convenient working 

condition,any problem, should discuss peacefully and kindly.

7. Buyer supply proper working tools, equipments and other conditions.

8. The expense including the accommodation and materials of the trial-

run the machine for testing and other expenses(electric, water, air and worker) will be on seller’s account,

 if the buyer or their representatives do the inspection of the machines before shipment.

9. Guarantee period: 14 months after shipment (the date of B/L)