2835SMD 48pcs 2 Foot 600mm 10Watt T8 Led Tube Lamp with Rotatable Sockets
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | LED High Bay Lights, LED Industrial Lighting, Outdoor LED Flood Light |
Product Detail
| Model No.: | SW-A10 |
|---|
Product Description
2835SMD 48pcs 2 Foot 600mm 10Watt T8 Led Tube Lamp with Rotatable Sockets
Features of T8 led tube lamp:
• 10W power consumption
• High flux output at 1000lm
• Replaces 18W linear fluorescent tube
• Availablein 6500K, 4500K and 3000K
• LED lifetime of 50,000 hours
• 85-265V AC, 50/60 Hz input
• Energy saving more than 70%
• Virtually no UV or IR output
• Flicker-free operation and turn-on
• Operating temperature range -of -20°C to 45°C
• Suitable for humidity of <90% RH andnon-condensing condition
• ElectricalShock Protectionincorporated
• CE, RoHS and TUV compliant
Specification:
| Model | SW-A10 |
| Wattage | 10W |
| Size | L600*W26mm |
| Lumens | 1000Lm |
| Working Voltage | AC 85-265V |
| LED chip | Epistar SMD2835 |
| LED quantity | 48pcs |
| Material | Aluminum housing + PC cover |
| PC Cover options | Frosted/ Transparent |
| End cap | G13 |
| Color Temperature | 2700-7000K |
| CRI | >70 OR 80Ra |
| PF | >0.9 |
| Old lamp equivalent | 18W fluorescent tube |
| Lifespan | >50000hrs |
| Warranty | 2 years |
Product advantage:
Where to use:
Mainly used in indoor lighting, and can be widely used in star hotel, shopping mall, conference room, office, optothermal control relatively strong laboratory, etc.; To light requirements higher lighting places.
LED tube lamp Installation:
A. Retrofitting an existing fixture with magnetic/inductive ballast and starter:
1. Turn power OFF.
2. Remove existing tube if any.
3. Disconnect all wires attached to the ballast.
4. Reconnect wires as shown in the diagram.
5. WARNING: RISK OF ELECTRICAL SHOCK! Make sure the main power is OFF before installing, removing or maintaining the product.
6. Turn power ON.
B. Retrofitting an existing fixture with electronic ballast:
1. Turn power OFF.
2. Remove existing tube if any.
3. Disconnect all wires attached to the ballast.
4. Reconnect wires as shown in the diagram.
5. 3. Insert LED tube into the cap holder in any orientation.
6. Turn power ON.
C. New installation with no ballast and starter:
1. Turn power OFF.
2. Connect wires as shown in the diagram.
3. Insert LED tube into the cap holder in any orientation.
4. Turn power ON.
