| Item Model |
ZLQ-7(Cantilever Structure) |
| 1.Cutting Torch |
One Flame cutting torch
or Plasma cutting Torch |
| 2.Control system |
SH-2000H Or Hypertherm EDGE |
| 3.Driving system |
AC servo motor,Pansonic |
| 4.Driving method |
Single Side |
| 5.Decelerators |
NEUGUET from Germany |
| 7.Ignition Equipment |
Automatic Ignition |
| 8.Heigth adjust |
Electronic Drive adjust |
| 9.Beeline leading rail |
ABBA from Taiwang |
| ⅡMain Parameter |
|
| 1.Width of rail |
1000mm(other size:1200mm) |
| 2.Effective Cutting width |
1000mm(other size:1200mm) |
| 3.Length of Rail |
1500mm(other size:2000mm) |
| 4.Effective cutting length |
1500mm(other size:2000mm) |
| 5.Cutting thickness |
Plasma Cutting:1~60mm
Flame Cutting:6~200mm |
| 6.Max.No-loading speed |
About 6000mm/min |
| 7.Cutting speed |
50-750mm/min |
| 8.Cutting accuracy |
±0.2mm (whole stroke) |
| 9.Repositioning accuracy |
±0.2mm |
| 10.Height accuracy |
±0.2mm |
| 11.Torch Adjusted Range |
200mm |
| 12.Power supply |
1~220/3~380V±10% 50Hz±1% |
| 13.Input Power |
1000W |
| 14.Oxygen gas(Flame) |
8×105Pa |
| Preheating Pressure |
3.92×105Pa |
| 15.Acetylene(Flame) |
0.49×105Pa |
| 16.Power Supply(Plasma) |
Hypertherm |
