Exothermic Copper Metal Welding Flux/Welding Flux Powder
| Min. Order: | 50 Bag/Bags |
|---|---|
| Trade Term: | FOB |
| Payment Terms: | Paypal, L/C, D/P, D/A, T/T, WU, Money Gram |
| Supply Ability: | 100000/month |
| Place of Origin: | Zhejiang |
Company Profile
| Location: | Shaoxing, Zhejiang, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Service |
| Main Products: | High Quality Solid Copper Wire, Copper Coated Steel Ground Rods, Copper Bonded Ground Rod, Copper Plated Earth Rod, Copper Clad Steel Earth Rod |
Product Detail
| Model No.: | AF-J0704 |
|---|---|
| Means of Transport: | Express, Ocean, Air, Land |
| Brand Name: | AF |
| Length: | Custom |
| Type: | Custom |
| Weight: | Custom |
| Item: | Exothermic Copper Metal Welding Flux |
| Material: | Aluminium and copper oxide powder |
| Application: | Conductor joints |
| Size: | Custom made |
| Machinery: | Other Welding euipment |
| Certification: | ISO9001 |
| Production Capacity: | 100000/month |
| Packing: | Bag/Carton |
| Delivery Date: | 30 Work days |
Product Description
Exothermic Copper Metal Welding Flux
SPECIFICATION
Molecular association, all kinds of metals can be brazed together.
Safe to use, nontoxic
Competitive price with good quality.
Good package and fast delivery
PRODUCTS PHOTOS
Welding Fluxe is also called aluminium heat welding powder.Use proper exothermic fluxes to make the connection joints more solid and extend the using life.
Main content and ratio of welding powder
Element | Ratio Wt/% |
Cu | ≥76.0 |
Al | ≤2.0 |
Fe | ≤10.0 |
Properties of joint
Properties | Technology index |
Conductivity | Resistance of conductor (Including joint) should be less than that of same length base metal |
Strength
| Joint strength should not less than 95% of low limit of raw material's strength (CCS material is regarded as pure copper ) |
High melting point | ≥1 083 ℃ |
Surface | No air hole ,residue and crack |
Section quality
| The max size anywhither should be higher than 1/3 of the thickness(or 1/4 of diameter) ,but should be less than 3mm |
Resistance of joint
Resistance /μΩ | Test location |
113 | Distance between tested location :15 cm |
Strength of joint
Strength Rm/MPa | Remark |
340 | No crack and base metal off |
Advantages of welding powder
1, Current carrying capability from welding point is same as conductor with good conducting performance. After inspection, the DC resistance ratio and change rate
are almost zero before and after welding. This is the level that any of the traditional
welding method cannot be compared
2, No need of resources from outside. It can be operated indoor and outdoor
3, It won't be damaged by surge current. The test shows the conductor will be melted
earlier than welding points when under high current impact in short period
4, Corrosion or slack will not be produced from welding. As it is weld junction,no
contact surface, no residual stress, junction is stable and reliable as long term
conductive body
5, As it is welding junction, connector and conductor are combined on molecular.So
it has a good mechanical strength and is a permanent junction
6, Equipment is simple, convenient and handy. The operation is easy and can be done
without professionals
OPERATION INSTRUCTION
Check to ensure the graphite mold and conductor is clean ,no residue before making the connection
Use a propane torch to dry wire conductors and remove remaining cleaning residue, solvent, or water before making the connection.
Close the graphite mold lid before ignition ,and close the lid tightly
Insert the conductors and position them for the connection.Ensure them in the center of cavity.
Keep the irrelevant personnel 1.5M away when welding
Keep the inflammable goods 1-2M away when welding
The operator must be equipped thermal barrier glove
Don't face to the mould opening when welding
The operator keep 1.5M away mould is must after ignition
Don't touch the mould and connected parts directly after welding
Open the mould and take the joint out with wrench 10-20S later after reaction .
Insulate the joint after the conductor cooling completely .
Operation Flow
Exothermic Welding Joints
Join any of below materials: Copper; Steel; Bronze; Brass; Commercial iron; Copper clad rod; Stainless iron; Wrought iron.
Quality Control
1.IQC (Incoming check )
2.IPQC (Process quallity control )
3.First Piece quality control
4.Mass products quality control
5.OQC (Outgoing quality control)
6.FQC (Final Quality Check)
Certifications
Our Services
1. Providing professional advises and operation.
2. Customer service online with 24 hours.
3. Full inspection on all the products before shipment.
4. Free logo embossing.
5. Shipping & Price Term: EXW my factory; FOB any Chinese port; CIF any destination port;
DDU your warehouse.
6. OEM and ODM are all available
Our Customers
Company Information
Our Main Products
Why Choose A-federal? ADVANTAGES
1. Professional operation experience.
2. The sizes all can be customised.
3. Sample for your reference available.
4. Low MOQ, Low Price.
5. Safe packing and prompt delivery
6. Quality guaranteed: ISO9001 2008 Standard
Welcome to Contact US:
Name: Jane Yang
Company: XINCHANG COUNTY ALWAYS FEDERAL NEW MATERIAL CO., LTD.
Address: Huluao Village, Qixing Street, Xinchang County, Zhejiang.
Whatsapp: +0086-13806745605
Fax: +86-0575-86289966
Skype: janeyang999