Green Anti - statich HPL Laminate Sheet , Washroom / Bathroom Partition Panels
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Shanghai, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | UV MDF Board, 18mm MDF Board, MDF Particle Board |
Product Detail
| Model No.: | CK-50079 |
|---|
Product Description
Resistant to UV, Fire, Water, Scratches, Anti-statich HPL / Compact Board / Washroom Partition / Bathroom Partition
| Properties | Specified Values as per | Specified Values as per | Typical Values of |
| IS: 2046 – 1995, Type S HGS | BS EN: 438, Type S HGS | Milton’s 1.0 mm HGS | |
| Thickness | 1.0 mm (±10%) | 1.0 mm (+ 0.1 mm) | 1.0 mm (±5%) |
| Resistance to Surface wear | ≥ 350 Revolutions | ≥ 250 Revolutions | ≥400 Revolutions |
| Boiling Test | |||
| Mass Increase (%) | 10% (Max) | NA | 7% |
| Thickness Increase (%) | 11.8% (Max) | NA | 7% |
| Appearance | Not less than 4 | Not less than 4 | Degree - 4 |
| Resistance to dry heat (at 180°C) | Not less than 4 | Not less than 4 | Degree - 4 |
| Dimensional Stability at Deviated Temperature | |||
| Longitudinal (%) | 0.55% (Max) | 0.55% (Max) | 0.35% |
| Transverse (%) | 1.025% (Max) | 1.05% (Max) | 0.75% |
| Dimensional Stability at 20°C | |||
| Longitudinal (%) | 0.375% (Max) | NA | 0.275% |
| Transverse (%) | 0.6% (Max) | NA | 0.50% |
| Resistance to Impact (by Small Diameter Ball) | 20 N (Min) | 20 N (Min) | 25N |
| Resistance to Cracking | Not less than 4 | Not less than 4 | Degree - 4 |
| Resistance to Scratching | 2N (Min) | 3N (Min) | 3N |
| Resistance to Steam | Not less than 4 | Not less than 4 | Degree - 4 |
| Resistance to Staining | Not less than 5 | Not less than 5 | Degree - 5 |
| Resistance to Cigarette Burns | Not less than 3 | Not less than 3 | Degree - 4 |
| Resistance to Colour Change | |||
| In Xenon ARC Light | Should pass test | 4 to 5 | Passed |
| In Enclosed Carbon Arc Light | Should pass test | NA | Passed |
| Appearance | Should be free from Defects | Should be free from Defects | Free from Defects |
HPL (high-pressure laminate) is the fireproofing building materials for surface decoration, made of kraft paper under the dipping process of melamine and phenolic resin. The material is made by high heat and pressure..
Color:
Solid/plain colors, wooden grains series, stone finish series, metal series, or customized color, if you need special color, please contact us.
Surface Finishing:
Matte, glossy, pearlescent, hi texture, silky, woven, carving, natural authentic, lrregular line, painting, gable spirit, quarter cutting, leather, natural stone, vertical rigato, horizontal, embossed and some other especial surfaces
Thickness Range: 0.5mm to 25mm as your requirements
Product Application
HPL are high quality decoration material, which are widely applied to Hospitality, Healthcare, Shopping mall, Coffee shop, Fast-food Restaurant, Gymnasium ,University, Research Institute, Middle School, Government building, Cubicles system, furniture, kitchen cabinet, cupboard, countertop, door skin, wall lining, partition, ship lining, ceiling, lift lining, shop fitting, shelving, and other industries.
Photos:
Procesing:
1. finished via impregnating the cecorative paper & kraft paper in melamine, drying and high temperature and pressure
2. outstanding resistance to abrasion ,high temperature,dirty,shocking,cigarette ignition and open flame,stain resistance
3. Can be widely used as indoor and outdoor surface decorative material, suited for every room of the home ---- even the bath and radian heated floors
4. Wider and wider market potential
Application:
|
office table |
toilet cubicle |
wall cladding |