1050mA Push Dimmable LED Driver 50W For Office Light / 1-10v LED Dimmer

350-1050mA 1-10V /push 50W Multifunction Dimmable LED Driver For LED Panel Light 

Description:

1, Very easy to installation as the iput and output side used the Press-in type terminal blocks 

2, with top-circuit design AC-DC-DC, no flicker

3, Dimmable LED driver with primary PUSH, secondary PUSH and 1-10V dimming interface.

4, DIP switch design is for different current and voltage selecting, maximum current up to 1050mA. Different LED light can chose the same model LED driver, save cost for purchasing and inventory management.

5, Jumper design for switching different dimming modes, it is very convenient to select suitable dimming function as you required.

6, Memory function: The driver has built-in permanent memory against power failure. Lights can return to previous dimming level when switch off and on again, even at mains restores.

7, Synchronization: thanks to the MCU programme, up to 50pcs drivers should be controlled by the same switch. This means there is no need for any additional synchrony wire in larger installations, where many drivers should be controlled by one switch.

8 Maximum length of the cable, from switch to last driver is 20m.

9, Factory setting: 100% dimming level and 350mA output.

10, Reset the LED diver easily by a jumper.

11, Protection: Short circuit / Over voltage / Over temperature.

12, Long life span 50,000h, 5 years guaranty.

Applications:

For office, warehouse, gas station etc.

Dimming Operation:

A) 1-10V Dim

Using the push dimming will make 1-10V dimming inactivated. The driver has to be reset to active the 1-10V dimming function again.

B) PUSH Dim

Short push (<0.1sec): Ignore, to avoid reaction on AC spike.

Short push (0.1~1sec): Switch on or switch off.

Long push (>1sec): Dimming up or down, dimming level automatically stops at minimum or maximum value.

Synchronization:

For the resynchronization to work correctly when more than one driver is connected to the same push button, follow steps of below after the drivers are connected:

A) Press push button for more than one second, followed by a short push (<1s), now, led light switches off.

B) Do a long push, the system will be resynchronized.

Specifications

INPUT	Input voltage	220-240Vac
	Input frequency	50-60Hz
	Input current	0.26A max
	Power factor	≥0.90
	Efficiency(Note1)	≥87%
	Leakage current	0.5mA/240Vac
OUTPUT	Output current/voltage and load	350mA 16-60V DC 21W max  500mA 16-60V DC 30W max 550mA 16-60V DC 33W max  650mA 16-58V DC 41W max 700mA 16-58V DC 41W max  750mA 16-56V DC 43W max 850mA 16-56V DC 47W max  900mA 16-56V DC 50W max 1050mA 16-48V DC 50W max 12Vdc 0-1050mA 12.6W max 24Vdc 0-1050mA 25.2W max
	Output load range	1x50W max
	You Might Also Like 1050mA Push Dimmable LED Driver 50W For Office Light / 1-10v LED Dimmer 1050mA Push Dimmable LED Driver 50W For Office Light / 1-10v LED Dimmer 1050mA Push Dimmable LED Driver 50W For Office Light / 1-10v LED Dimmer Related Searches: Led Dimmable Candle Light Dimmable Led Par30 Light Led 50w LED Push Light Led Push Button Light Dimmer Led Spotlight White Led Dimmer Rgb Led Dimmer LED Driver Dimmable Led Bulbs Show Post Buying Request Contact Supplier Sign In | Join Free About - Feedback -Terms - Privacy - Desktop View Copyright @ HiSupplier.com, All Rights Reserved