Industrial Tube ice Making Machine 1T

SAT10 Capacity: 1.0 Ton daily tube ice machine 

The frame and principle

01.Overflowport

02.Upperwater tank

03.Refrigerants outlet

04.Stainless steel heat exchange tubes

05.Supercoolingcavity

06.Speedreducer

07.Motor

08.Driving gear

09.Driven gear

10.Waterinlet

11.Observationwindow

12.Floatvalve

13.Diffuser

14.Waterpipe

15.Shell

16.Iceskates

17.Hot refrigerants inlet

18.Cooling refrigerants inlet

19.Baffle

20.Water pump

21.Ice water separation turntable

22.Iceoutlet

23.Underwater tank

24.Outfall

The core component of the tube ice machine is the ice-making evaporator and its main body is a vertical shell and tube type device. Several stainless steel heat exchange tubes run through the upper tube plate and the lower tube plate and each of the top and bottom has a water tank. Refrigerant is evaporated in the main body during the ice making process, absorbing heat from water of the upper tank flowing along the inside wall of heat exchange tubes. Water is frozen into ice attached to the inside wall of the steel pipes. When the ice reaches the desired thickness, refrigeration system will change into doffing ice mode automatically to doff ice. Simultaneously high temperature gas refrigerant will be supplied into the evaporator shell, promoting the formation of a layer of water film between ice and evaporation wall. Thus ice inside the tube wall will fall by gravity, and simultaneously will be cut off by the rotating ice cutter below, discharged along the ice outlet. When ice making is finished, low temperature refrigerant will carry on heat exchange again, which recycles the energy of ice doffing and improves the cooling performance of units.

Features of tube ice machine

compact structure, less premise, lower production cost, high COP, more energy saving, short installation period, easy operation.

Tube ice is a kind of hollow cylindrical tubular ice, whose inner hole diameter of 5～15mm,ranging from 40～60mm long. Its external diameter can be divided into three specifications :φ22mm,φ29mm and φ35mm.

Tube ice has good air permeability for its hollow tubular shape. It is more suitable for storage and transportation because the melting time of the tube ice is longer than the flake ice.

The part in contact with the ice is totally made from food grade stainless steel and PP materials, which is environmentally friendly and sanitary, completely conforming to the food standard.

This transparent tube ice is widely used to mix wines, freeze drinks, make ice pastries and keep fresh etc. in foreign countries.