Universal Programmable 800L ESS Chamber High and Low Temperature Test Chamber
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Guangzhou, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Climatic Test Chamber, Temperature Humidity Chamber, Environmental Test Chamber |
Product Detail
| Model No.: | KMT-800S |
|---|
Product Description
HFC-23 Refrigerant 800L High and Low Temperature Recycling Test Chamber for ESS
1. Brief Introduction of ESS:
The objective of Environmental Stress Screening is to tailor a screen which will precipitate and detect latent defects as early as possible in the manufacturing cycle, where it is the most cost effective to correct.
ESS is a process, and it must be controlled. Without control, repeatability, and reliability, the screen would be questionable. The dynamic and thermal profiles for establishing an ESS process are not rigid rules. They are only guidelines.
2. Explore High-low temperature test chambers:
High and low extremes of temperature can significantly alter the mechanical and electrical properties of a product, such as the brittleness of components, viscosity of lubricants, electrical conductivity and oscillator frequencies. TRaC's temperature testing can simulate temperature extremes cycling from -70°C to +180°C (and up to +500°C constant), and KOMEG's 15 temperature chambers cater for small components in our series of 0.4 m3 cabinets through to complete systems, in our range of walk-in chambers.
3. Technical Parameter:
| Model | KMH-800S | ||||
| 800L chamber volume | |||||
| Temp. range | -70°C 150°C | ||||
| Display resolution | 0.1°C | ||||
| Temperature stability | High±0.5°C ,low ±1.0°C | ||||
| Temperature uniformity | ±2.0°C | ||||
| Heat up time | -70°C +100°C,within 60 min | ||||
| Pull down time | +20°C -70°C,within 80 min | ||||
| Interior Dimension(mm) | W1000 x H1000 x D800mm | ||||
| Exterior Dimension(mm) | W1280 x H2160x D1750mm | ||||
| Interior material | Stainless Steel Plate ( SUS 304) | ||||
| Exterior material | Baked Painting Steel Or Stainless steel ( SUS304) | ||||
| Insulation material | Rigid polyurethane Foam and Glass Fiber Wool | ||||
| Total power | 18KW ( heater 6KW included) | ||||
| Max current | 35.3A | ||||
| Ambient Temp. | +5°C +35°C | ||||
| Power Supply | AC 380V±10 50Hz ,3 phase 4 wires +Ground Wires | ||||
| Weight | 550KG | ||||
| Sight window size | 460 X 560mm | ||||
| Sample holder | 2 pcs | ||||
| Fittings | cable port(portΦ50mm)*1, chamber lamp*1, power cable *2m | ||||
| Safety device (standard) |
No fuse breaker,over pressure,over heat&over current protect,over temp. protect, over load protect
| ||||