Waterproof Static Shock Pet Collar Rechargeable Wireless Dog Training Collar Dog No Barking Collar

Waterproof Static Shock Pet Collar Rechargeable Wireless Dog Training Collar Dog No Barking Collar JF-X888

Main features

- 6 intensity levels for a wide variety of dispositions

- easy testing method to check the No Bark Collar

- Waterproof and Rechargeable 

- on/off and select the intensity level of stimulation 

- off position is to turn off the Bark Collar

Principles of operation

The Anti-Bark Collar stops barking with progressively increasing sound and shock which is controlled by a microprocessor distinguishing your dog's bark from other environmental noises and automatically delivers  sound and shock after each bark.

To protect the dog, if the continuous stimulus reaches the 7 levels, then the collar will stop working for 1 Minutes.

The use of the warning tone followed by increasingly intense tones and shocks sets up a pattern that your dog will 

quickly learn is caused by its own barking. It takes time to break bad habits.

ON/OFF MODE

1.Turn on bark collar by pressing (On/Off) button for 4 seconds, then the red LED light will be turn on. 

2.When the bark collar is working, the red light will be flashing. If the dog does not bark over 2 minutes, 

    it will turn to the sleep mode and the LED will turn off.In the sleep mode, the bark collar will activate 

    the bark automatically

3.Turn off bark collar by pressing (On/Off) button for 4 seconds, then the red LED light will be turn off.

To set the Static Correction Level

mode choose

Read all steps before attempting to set the Static Correction level.

Bark collar have 6 intensity levels for a wide variety of dispositions (1-6 Level). 

1. The bark collar green LED indicator light will emit a series of flashes representing the Static   Correction Level.

2. Increase the Static Correction level by pressing and releasing the Correction Level Button within 5seconds

of the previous series of flashes.

For example After turn on the bark collar. pressing on/off, the green light will be flashing one time. It's means is 1 Level. 

Pressing on/off again , the green light will be flashing two time. it's means is 2 Level.

The Static Correction levels increase in strength from 1 to 6. Pushing the Correction level Button while the Bark Collar is on level 6 will cause the Receiver collar to revert to level 1. Refer to the function and response Table to choose the Static Correction level that best fits your pet.

How to charge the Bark Collar

1. Connect the charger connector to the charging jack.

2. Plug the charger into a standard outlet (DC-5V). The green LED light will be flash.

3. After fully charged, it will be turned to green LED light automatically.

4. When charging is completed, put back the rubber cover to keep charging jack clean.

5. Low battery indicator: the Bark Collar will keep beeping for 2 minutes unless it gets charged.

Note: Please check whether the battery needs to recharge before you use it. When you turn on the receiver, 

            if there are beeps for 2 minutes, you need to recharge it before using.

TESTING

Test by scratching the rough surface of the test tool on the Bark Collar (as shown in the diagram) using a 

fingernail or pen. The Bark Collar will make a sound, after the third voice, then will be arise electric shock 

function. Then repeat the same process if you want to try it again.

Packaing: 36pcs/carton Carton Size: 45*35*30CM G.W/N.W:11.5KG/10.5KG

your success is our business

Shenzhen Jianfeng Electronic Pet Product Co., Ltd.

Contact: Amy

Tel:+86-755-29589448

Mobile: +86-15807551519

Skype: szjfamy

Company website:www.stop888.com

Alibaba website: jfsz.en.alibaba.com