Airtight Inflatable Advertising Products Large Inflatable Balloon 0.45mm tarpaulin PVC

Blue color 12ft inflatable balloon made by 0.45mm tarpaulin PVC for advertisement

Best sewing machines

Using the best sewing machines ordered to handle nylon thread we double stitch the entire unit with the best 18 ounce heavy duty Vinyl.

DOUBLE STITCHING EVERYWHERE 

We double stitching everywhere, with fourfold stitching at bottom stress point. Double stitching inside and double stitching outside to make sure the inflatables are strong enough.

Heat sealing machine
Can insure high airtight and soundness for our inflatable products.

DOUBLE STITCHING EVERYWHERE 

We double stitching everywhere, with fourfold stitching at bottom stress point. Double stitching inside and double stitching outside to make sure the inflatables are strong enough.

REINFORCED STRIPS AT JOINT 

Our Inflatables will make reinforcestrips at the bottom joint and each corner. So when the kids bounce on the games, you do not need to worry about the safety at all. As the bottom can bear the kids no matter how they play on the games.

TIGHT PACKAGE BAGS 

We pack inflatable games by carpet at first, then put the package in tarpaulin bag so that the packages will not be frazzled during delivery process. In order to let you find your goods quickly, we will paste a mark paper with your order number.

Part1.inflatable water games's protection methods:

1, In order to ensure that your equipment to achieve a normal life span, please don’t let too many children participate in playing at the beginning. Usually on the inflatables only one child up to three square meters.

2, The decoration on the inflatable is for decoration, please notice the children not to pull or tear in order to avoid damage.

3, Doodle on the device with any hard things is prohibited.

4 If the equipment is damage, add some special gule in the PVC material or its coated, wait about 5 minutes, then to glue with appropriate compression and wait for a few minutes.

5, If the device's pressure is too soft, check there if there are too many leaks and torn holes, or power failure; if pressure is too storng, please block the fan air inlet a little point.

6, such as large-scale use of non-normal damage, the factory can provide professional maintenance services, or return to the factory directly for maintenance.

Part2, inflatable water games's installation instruction:

1, the inflatable castle placed on flat ground, had better to put a mattress (such as carpets, plastic color cloth) below the inflatable castle and then expand it.

2, Find out the inflatable castle air inlet pipe,then connect with the blower , and then alternate air inlet with a rope fastened.

3, when the blower switched on, the inflatables will be blow up within 5-10 minutes.

Part3,the installation of blower:

1, choose GB 1. 5mm2-4 mm2 cable connected to a number of meters with fans, connect the other end of the air switch, and connected to an electric shock protector.

2, check before you use it and its plate supply voltage line,to see if they are in the same direction.

3, Choose a relable chassis ground, do some regular inspections ,by the fan air inlet on the fence, to avoid accidents.

Part4, The cleaning and collection:

1, Cut off the power, open interfaces and exhaust fans, exhaust time usually 10-25 minutes. The  excess gas must be squeezed out. If the device is watered, Be sure to drain the water and air.

2, Do cleaning, use detergent to clean the stain, wipe away the grease, and then cleaned with water, sun to dry.

3, Fold the device, with underside hide front, then use tarpaulin to cover it.

4, if long-term leave unused,need to clean equipment, folding, bundling, packaging. The best enviroment for storage temperature is -50 ~ +40 degrees Celsius.

5, Fans should pay attention to the moisture and corrosion. Inflatable device should pay attention to rodent control insects bite.

Part 5, Attention:

1, Children under 6 years old is strictly prohibited to play thrilling project.

2, Avoid young children and older child

ren playing together in order to avoid collisions.

3.Managers should arrange the play for children, all in accordance with the rules of the game play, in order to avoid unexpected.