RJ-45 Connectors IEEE82.3AF POE Power Injector 48V 15.4W / 25W
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Fiber Optic Media Converter, Manageable Media Converter, Fiber Optic Switches |
Product Description
RJ-45 Connectors IEEE82.3AF POE Power Injector 48V 15.4W / 25W
The single port Power Over Ethernet (PoE) DC Power Injector eliminates the need for a PoE enabled equipment, such as IP Camera, IP Telephones, Wireless LAN and Bluetooth Access Points, etc.. The injector is typically installed near the Ethernet hub and connected to a remote PoE device through a single Ethernet Cat 5 cable up to 100meters / 330 feets . The injector can support an advanced 802.3af or nonstandard (optional) compliant device which supporting the standard PoE pin out
(Pins 4&5 Power + / Pins 7&8 Power -)
Technical Specifications:
LAN Data Rates:
--10/100 Mbps (802.3 10Base-T/802.3u 100Base-T)
Input Power Requirements:
--Input voltage ..................... 100 VAC to 240 VAC
--Input frequency...........................47 Hz to 63 Hz
Power over Ethernet Output:
--Pin Assignment and Polarity...4/5 (V+), 7/8 (V-)
--Output Power.................please refer to ordering information
Efficiency.........................................75% min
--Short circuit protection................ auto recovery
--Over current protection................ auto recovery
Front Panel Indicators:
--Power Indicator…….DC Power Outout (Green)
--PoE Indicator…………..….PD Statues (Green)*
Environmental Conditions:
--Operating temperature ............... …0 to 50
--Cooling ................................ free air convection
--Storage temperature ............... -20 to +85
--Operating Humidity...90% max non-condensing
Mechanical Specifications:
--Case Material…………….………………..Iron
--Case Color……………………………….Black
--Net Weight………………….250g approx. / unit
--Dimensions………70(W) x 35(H) x 100 (L) (mm)
Connectors:
--AC Inlet……………………………………IEC-J-4
--LAN……………………………….Shielded RJ-45
*PoE LED Indicator description, only valid for advanced 802.3af application:
|
LED Pattern |
Port Status |
|
OFF |
Port open or Non-Powered Device |
|
ON |
Port On |
|
FLASH |
Unmatched PD |
RJ-45 Connectors and Pinout:
|
RJ-45 |
TYPE |
Pin 1 |
Pin 2 |
Pin 3 |
Pin 4 |
Pin 5 |
Pin 6 |
Pin 7 |
Pin 8 |
|
IN |
DATA |
RX+ |
RX- |
TX+ |
NC |
NC |
TX- |
NC |
NC |
|
OUT |
DATA+PWR |
RX+ |
RX- |
TX+ |
VDC+ |
VDC+ |
TX- |
VDC- |
VDC- |
Ordering Information:
|
Part Number |
Supported Standard |
|
