Washing Flame Retardant Clothing Firefighter Turnout Gear with Nomex IIIA Material

Washing Flame Retardant Clothing Firefighter Turnout Gear with Nomex IIIA Material

MATERIAL:Nomex IIIA  , 6.0 oz/m²

SIZES:XS to 4XL

INTERNATIONAL STANDARDS:EN469 2005, GA10

COLORS:Navy blue ,orange ,yellow ,red ,Khaki

FEATURES:

•Front closed by heavy duty FR zipper and FR Velcro.

•Two big patch pocket ,one radio pocket on left chest ,closed by Velcro.

•FR yellow silver yellow reflective tape in 3” width 3M Scotchlite

•High collar fully lined with throat closure tab

•FR drainage mesh into waist hem and bottom pocket

•Knitted cuffs with thumb loop

•Elasticated braces with quick release buckles

DESCRIPTION:Greater Flexibility for More Comfort

Flame-resistant, waterproof, Thermal liner/moisture barrier: Quilted Nomex® batt sewn to PTFE coated on E89™

Comfort inherent flame resistant inner linning

Use yellow color for jacket to enhance the high viz on at night.

If you have design want to make, we can do as follows:           Web:www.uprotec.com/web                  

1) You send us your design (samples or pictures or some ideas), so that we could know what you want exactly;
2) We make the samples for you then send you the pictures and samples by express;
3) As soon as you receive the samples and approve to us (if any changes we will follow them), then you can place the order to us;

Service we supply                                                                                                                             

1) The new design and new materials are provided as your requirements;
2) We are pleased to be given a test order;
3) The OEM services are available;
4) One-stop service: Satisfy what you want;

Care and Maintenance

PROPER WEARING

    FR clothing can only provide protection if the wearer follows garment manufacturers' recommendations for proper use:

    *Do not put on or take off the garment in proximity of flammable gasses, vapors, dusts or in other potentially explosive environments.

    *In potentially explosive atmospheres, proper grounding procedures must be used.

    *Wear garments with the appropriate arc rating as dictated by an electric arc hazard analysis. Consult employer if unsure.

    *Wear garments properly – collars closed, sleeves and cuffs down and secured, shirt tails tucked, closures secured, and other manufacturer recommendations.

    *Wear looser-fitting garments that provide adequate mobility.

    *Do not wear non-FR clothing over FR garments. The outermost layer must be FR

    *Wear only FR or non-melting undergarments (e.g. cotton, silk, wool.)

    *Wash garments thoroughly after each wearing to remove contaminants.

CARE TIPS:   

    Most flame-resistant garments can be handled safely using common laundering and care procedures. However, a few precautions must be followed to ensure your FR garments maintain their maximum effectiveness. Remember: FR clothing is safety equipment that just might save your life. It is imperative to make sure your FR garments are properly cleaned and maintained.

    Carefully follow the manufacturer's care label when laundering FR garments. Many FR fabrics require mild wash and dry conditions to maximize the life of the garment. *Wash new flame-resistant garments prior to wearing.

    *Wash flame-resistant garments separately from standard clothing.

    *Do not use chlorine bleach.

    *Make sure FR garments are clean and in proper repair before each wearing.

    *Remove oils and flammable contaminants from FR garments. Flammable contaminants can be a fuel source that adds to burn injury.

    *Repair garments using "like materials." Use FR fabric, thread and components. Return garments to the manufacturer for repair, or use an authorized FR repair facility.

FAQ: