Flame Retardant Arc Flash Suit for Electrical Worker

High Quality Flame Retardant Arc Flash Suits for Electrical Worker

Product Description

Material

88% cotton, 12% nylon

7oz/235gsm

Size

UK or US sizes from XS-5XL

International Standards

NFPA70E, EN ISO 61482

Color

Light Blue, Navy, Grey, Orange, Yellow

Description

The shirt and pants is fashion design, all stress points on pants are bar-tack reinforced for strength. Comfort fitting and easy movement for working.

Features

• Front closed by flame resistant button
• Two chest pockets closed by FR button
• Elasticized waistband on pants
• Two back hip inset pockets
• Two side pockets
• Permanent stitched-in front pleat
• ATPV rate: 8.7 cal/cm²

If you have design want to make, we can do as follows:           Web:www.uprotec.com/web                  

1) You send us your design (samples or pictures or some ideas), so that we could know what you want exactly;
2) We make the samples for you then send you the pictures and samples by express;
3) As soon as you receive the samples and approve to us (if any changes we will follow them), then you can place the order to us;

Service we supply                                                                                                                             

1) The new design and new materials are provided as your requirements;
2) We are pleased to be given a test order;
3) The OEM services are available;
4) One-stop service: Satisfy what you want;

Care and Maintenance

PROPER WEARING

    *Wash garments thoroughly after each wearing to remove contaminants.

    *Do not put on or take off the garment in proximity of flammable gasses, vapors, dusts or in other potentially explosive environments.

    *In potentially explosive atmospheres, proper grounding procedures must be used.

    *Wear garments with the appropriate arc rating as dictated by an electric arc hazard analysis. Consult employer if unsure.

FR clothing can only provide protection if the wearer follows garment manufacturers' recommendations for proper use:

    *Wear garments properly – collars closed, sleeves and cuffs down and secured, shirt tails tucked, closures secured, and other manufacturer recommendations.

    *Wear looser-fitting garments that provide adequate mobility.

    *Do not wear non-FR clothing over FR garments. The outermost layer must be FR

    *Wear only FR or non-melting undergarments (e.g. cotton, silk, wool.)

CARE TIPS:

    Most flame-resistant garments can be handled safely using common laundering and care procedures. However, a few precautions must be followed to ensure your FR garments maintain their maximum effectiveness. Remember: FR clothing is safety equipment that just might save your life. It is imperative to make sure your FR garments are properly cleaned and maintained.

    Carefully follow the manufacturer's care label when laundering FR garments. Many FR fabrics require mild wash and dry conditions to maximize the life of the garment.

    *Do not use chlorine bleach.

    *Make sure FR garments are clean and in proper repair before each wearing.

    *Remove oils and flammable contaminants from FR garments. Flammable contaminants can be a fuel source that adds to burn injury.

    *Repair garments using "like materials." Use FR fabric, thread and components. Return garments to the manufacturer for repair, or use an authorized FR repair facility.

    *Wash new flame-resistant garments prior to wearing.

    *Wash flame-resistant garments separately from standard clothing.

FAQ:

 

Is FR clothing uncomfortable?

     FR clothing is a safety item for personnel working in environments with a hazard of clothing igniting. There are many climates where long pants and long sleeve shirts are hot, no matter what the fabric is made of. A variety of FR fabrics are available today, some of which are perceived as being more comfortable than others. FR clothing does not necessarily need to be more uncomfortable than standard clothing.

How should FR garments fit?

     The looser fitting the FR garments, the more thermal protection the clothing system will provide. Air is a very effective insulator; therefore, maintaining an air gap between the clothing and skin will improve thermal protection. However, a loose fit must be balanced against the hazard of clothing being caught in moving equipment. Most FR products will shrink either the same or less than standard work clothing, and should be sized accordingly.

How often does FR clothing have to be replaced?

You Might Also Like

Durable Flame Retardant Arc Flash Suit for Electrical Worker Navy Grey Orange Yellow Multi Color