IEC60529 IPX3 and IPX4 Environmental Test Chamber Rain Test Chamber

Touch Screen Controller IPX3 and IPX4 Environmental Test Chamber Rain Test Chamber

Application:
    Rain / Spray Test Chamberis applied to test the shell’s waterproof effect of electronics, automobile and communication, using rainfall simulation to test the product’s waterproof performance and assess the product’s waterproof performance’s loss classification. 

IPX3/4 Swiping Pipe Rain Test: 
1. Meet the requirement of c standard IPX3 water pouring test and IPX4 water splash test.
2. The test sample will be put or installed on the center of the half-round sinuous pipe and make the bottom of the test samples and the oscillating axis in a horizontal position. During test, the sample would spin around the center line.
3. Swing pipe standard configuration: R400mm and R500mm two types.  Swing pipe inner diameter: Φ15mm.     DillΦ0.4 holes and make the water spray to the center.  The water pressure of the device entrance is     equal to 10m water level, spraying water pressure is 80-100kpa.
4. Water spraying pipe swing angle: 120º,180º,360º,  Vertical sides: 60º,90º,175º.
     Complete a swing(2*120º) time is 4S.
     Complete a swing(2*360º) time is 12S.
5. Can manual default the test parameters, complete testing automatically shut off the water supply and  

    pendulum pipe Angle automatic zeroing and automatic eliminate seeper, avoid scale blockage needle tip.
6.  Use Mitsubishi PLC, LCD panel test procedure control box, stainless steel curved pipe, alloy aluminum frame, stainless steel shell.
7. Servo drive mechanism, guarantee the pendulum pipe Angle of precision, the overall pendulum tube structure for hang a wall.

Main specifications: (all can customize)

Swing pipe radius R400 or 500mm, tube diameter 19, madeof stainless steel pipe, water jet hole diameter 0.4, each blowhole average flow of 0.07L/min