High Precision Tire Curing Press Machine , Hydraulic Vulcanizing Press

High Precision Tire Curing Press Machine , Hydraulic Vulcanizing Press

Quick Detail:

5.1 Mechanical precision

• Levelness of top surface of base (test at the seller’s plant)≤0.1mm/1000 mm.
• Parallelism between bottom surface of cross beam and top surface of base(test at the seller’s plant)≤0.5mm.
• Verticality of upper vulcanization house movement≤0.25mm.
• Coaxality between upper and lower chucks of back air-charging device≤1.0mm
• Flatness of upper hot plate and lower hot plate≤0.1mm
• Coaxality between upper &lower hot plate and central organization (within scope of adjusting mold)≤φ0.2mm
• Repeatability of coaxality between upper hot plate and lower hot plate is ±0.15mm.
• Coaxality between central line of piston rod of segmental mold operation cylinder and central organization is≤0.5mm
• Parallelism between upper hot plate and lower hot plate is ≤0.04mm(Conduct lead pressing test when mold clamping force is at the maximum)
• When piston rod of central organization is listed to the limit position, verticality between it and top surface of base should be ≤0.25mm
• Verticality of column of tire mounting organization is ≤0.3mm/m
• Cylindricity of tire holder (when it is at φ508) is ≤0.5mmTIR
• Coaxality between central line of tire holder and central organization should be ≤1mm
• Parallelism between positioning plane of tire holder and upper & lower hot plate should be ≤0.5mm
• Offset between hole center of installation mold of upper fixed plate and center of T-trough of lower hot plate should be≤2mm.
• Other technical requirements should conform to related provisions in article four of GB/T13579—1992.

5.2 Process precision

• Temperature precision of upper and lower hot plates ±1
• Temperature difference between upper hot plate and lower hot plate ≤1
• Temperature precision of steam house ±1
• Temperature difference between left and right molds ±1

Synchronism of air charging for left and right capsules (setting) ±0.0

Applications: 

Used for vulcanization of steel-belted tire

Specifications