Wood-based panel internal bond strength tensile testing machine
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB,CFR,CIF |
| Payment Terms: | Paypal, L/C, T/T, WU |
| Place of Origin: | Shandong |
Company Profile
| Location: | Jinan, Shandong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Means of Transport: | Ocean, Air, Land |
|---|---|
| Power: | Electronic |
| Usage: | Wood Testing Instrument |
| Brand Name: | wangtebei |
Product Description
1. introduction
This teting machine is to measure internal bond strength of wood-based panel. Wood-based panel internal bond strength measuring is to load tensile force to the surface of wood-based penal evenly until it is broken. Wood-based panel internal bond strengh is calculated as the ratio of maximum tensile force of its area.
2. Test
1) Specimen size of wood-based panel: 50 X 50mm(length X Width)
2) Picture Internal bond strength measuring device:
3) Put the wood-based panel specimen in the internal bond strength measuring device installed on the tensile testing machine, and then load to the wood-based panel specimen with the tensile testing mahcine evenly until the specimen is broken. The test should be finished within (60±30)s.
4)
3. Technical parameters of testing machine
No. | Item | Spec. |
1 | Max. Load | 50KN |
2 | Resolution of test force | 1/±300000 |
3 | Resolution of displacement | 0.001mm |
4 | Precision of crossbeam displacement | ±0.5% |
5 | Precision of deformation | ±0.5% |
6 | Measuring range of test force | 1%-100%FS |
7 | Relative error of test force | ±1% |
8 | Relative error at zero point | ±0.5% |
9 | Speed of crossbeam | 0.01-500mm/min |
10 | Precision of crossbeam speed | ±1% |
11 | Speed range of load | 0.005%-5%FS/s |
12 | Precision of load speed | When speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value |
13 | Speed of deformation | 0.005%-5%FS/s |
14 | Precision of deformation speed | When speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value |
15 | Stroke of crossbeam | 800mm |
16 | Effective tensile height | 650mm |
17 | Effective test span | 400mm |
18 | Effective compression height | 700mm |
19 | Clamps for round specimen | Ø4-9mm |
20 | Clamps for flat specimen | 0-7mm |
21 | Diameter of compression platen | 100mm |
22 | Voltage and power | 220V±10%, 50Hz, 1KW |
23 | Dimension of main machine | 755X520X1780mm |
24 | Weight of main machine | about 400kg |