Overlaid wood-based panel peeling testing machine
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB,CFR,CIF |
| Payment Terms: | Paypal, L/C, T/T, WU |
| Place of Origin: | Shandong |
Company Profile
| Location: | Jinan, Shandong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Means of Transport: | Ocean, Air, Land |
|---|---|
| Power: | Electronic |
| Usage: | Tensile Testing Machine |
| Brand Name: | wangtebei |
Product Description
1. Introdution
This testing machine is to measure the peeling force of the PVC film layer on wood-based panel.
2. Test
Wood-based panel test sample size: 100mm X 25mm (length X Width)
Wood-based panle test sample preparing: slot at the 10mm position on one side of the wood-based panel test sample. Depth of slot should be to the joint of wood-based panel and PVC film. See the picture below:
Test procedure: peel the PVC film for a certain length and then fix the test sample into the test clamps tightly on the test machine. Then pull the wood-based panel test piece with the testing machine and software of testing machine will record the max. Peeling force.
Overlaid wood-based panel peeling test diagram:
3. Technical parameters of testing machine
1 | Model | WTD-W1/W2/W5 |
2 | Max. capacity | 1000N/2000N/5000N |
3 | Grade | Grade 1 |
4 | Measuring range | 1%-100%FS |
5 | Relative error of indicating value | ±1% |
6 | Force resolution | 1/±300000FS |
7 | Displacement measuring range | 0.2%-100% |
8 | Load speed range | 0.005%-5%FS/s |
9 | Load speed precision | When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5% |
10 | Deformation speed range | 0.005-5%FS/s |
11 | Deformation speed precision | When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5% |
12 | Displacement speed range | 0.001-500mm/min |
13 | Displacement speed precision | Within ±0.2% of set value |
14 | Range of constant load control, constant deformation control, constant displacement control | 0.5%-100%FS |
15 | Precision of constant load control, constant deformation control, constant displacement control | When set value is more than 10%FS, precision is within ±0.5% of set value When set value is less than 10%FS, precision if within ±1% of set value |
16 | Stroke of crossbeam | 1000mm |
17 | Voltage | 220V±10%,50Hz(should connect to the ground) |
18 | Power | 400W |
19 | Dim. Of load frame | 415X415X1650mm |
20 | Over weight of product | 150kg |