polypropylene pearl films tensile testing machine
| Min. Order: | 1 Set/Sets |
|---|---|
| Trade Term: | FOB,CFR,CIF |
| Payment Terms: | Paypal, L/C, T/T, WU |
| Place of Origin: | Shandong |
Company Profile
| Location: | Jinan, Shandong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
Product Detail
| Power: | Electronic |
|---|---|
| Usage: | Tensile Testing Machine |
Product Description
1.brief introduction
this polypropylene pearl films tensile testing machine is to measure tensile strength and elongation at break of polypropylene pearl films( films of single surface heat and both surfaces heat, films of non-heat).
2.sample
Mateials of polypropylene pearl films include main material polypropylene resin and a certain amount of pearl materbatch. By the biaxial orientation tensile with method of membrane, so the polypropylene pearl films is made. When measuring its tensile strength and elongation at break, a sample with size 150X15mm±0.1mm should be taken from the whole film and then load tensile force to the sample with a speed of 250mm/min±10mm/min.
3.technical specification of testing machine
1 | Model | WTD-W1/W2/W5 |
2 | Max. capacity | 1000N/2000N/5000N |
3 | Grade | Grade 1 |
4 | Measuring range | 1%-100%FS |
5 | Relative error of indicating value | ±1% |
6 | Force resolution | 1/±300000FS |
7 | Displacement measuring range | 0.2%-100% |
8 | Load speed range | 0.005%-5%FS/s |
9 | Load speed precision | When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5% |
10 | Deformation speed range | 0.005-5%FS/s |
11 | Deformation speed precision | When speed is less than 0.05%FS, precision is within ±1% When speed is more than 0.05%FS, precision is within ±0.5% |
12 | Displacement speed range | 0.001-500mm/min |
13 | Displacement speed precision | Within ±0.2% of set value |
14 | Range of constant load control, constant deformation control, constant displacement control | 0.5%-100%FS |
15 | Precision of constant load control, constant deformation control, constant displacement control | When set value is more than 10%FS, precision is within ±0.5% of set value When set value is less than 10%FS, precision if within ±1% of set value |
16 | Stroke of crossbeam | 1000mm |
17 | Voltage | 220V±10%,50Hz(should connect to the ground) |
18 | Power | 400W |
19 | Dim. Of load frame | 415X415X1650mm |
20 | Over weight of product | 150kg |
