Waterproof 100 Meter 860 Lumens W16XL Diving Torch with 18650 Battery
| Place of Origin: | Guangdong |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Underwater Dive Lights, LED Diving Light, Scuba Diving Lights |
Product Detail
| Model No.: | AIA-1 |
|---|
Product Description
Waterproof 100 Meter 860 Lumens W16XL Diving Torch with 18650 Battery
Quick Details:
- Rechargeable scuba diving light
- 860 Lumens with Cree XM - L U2 LED
- Waterproof 100 Meters underwater
- High quality with competitive price
- 860Lumens diving flashlight
- Cree LED bulb
PRODUCT SPECIFICATIONS
| Model | W16XL Diving Light |
| Bulb | Cree XM-L U2 (Max 860 lumens) |
| Color temperature | 6500K |
| Three output levels | High> Low>Strobe |
| Runtime | High: 70min, Low: 320 min, Strobe: 150 min |
| Reflector | Glossy Aluminum reflector |
| Lens | 8mm Polycarbonate Board |
| Body material | Durable aircraft-grade aluminum |
| Angle of light beam | 6° hot spot, 110° periphery |
| Surface treatment | Premium Type III hard-anodizing |
| Color | Black |
| Battery | 18650 Li- ion battery *1 |
| With battery over-discharging protection, polarity reversing protection | |
| Operation voltage | 2.8V to 4.5V |
| Waterproof | 100 meters underwater |
| Dimensions | 148(length)*23(dia. of end)*50mm (dia. of head) |
| Weight | 210grams (without battery); 260 grams (with battery) |
| Underwater Weight | 130 grams (with battery) |
| Impact resistance | 1.5M |
ON/OFF
Turn the tail clockwise until the light activates. DO NOT OVERTIGHTEN.
To turn the light off, back off the tail counter-clockwise until the light goes off.
Continue to back off for approximately one full turn to eliminate the possibility of the light activating accidentally in storage. For underwater use, backing off too much will allow water to enter past the o-ring.
MODES CHANGING
Successive switch ON-OFF within two seconds to cycle through high, low, strobe.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.