Place of Origin: | Guangdong |
---|
Location: | Shenzhen, Guangdong, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Underwater Dive Lights, LED Diving Light, Scuba Diving Lights |
Model No.: | AIA-1 |
---|
Gooman Handle Underwater Dive Lights 200 meters with Red and UV Light
PRODUCTION INTRODUCTIONS
PRODUCT SPECIFICATIONS:
Model | WG76W Goodman Handle Diving Video Light |
Bulb | White CREE XM-L2 U2 LED *12 (max 6500 Lumens); CREE XP-E N3*4 (wavelength 620nm, max 400 Lumens) |
Modes | High>Medium> Low>Red> off |
Runtime | High (1.5h); Medium (3.0h); Low (5.0h); Red (8.0h) |
Color temperature | 5000K (white light) |
Reflector | No hotspot design, no reflector |
Lens | 5mm Polycarbonate Board |
Body material | Durable aircraft-grade aluminum |
Angle of light beam | 120° |
Surface treatment | Premium Type III hard-anodizing |
Color | Black |
Battery | Rechargeable Li- ion battery pack (18650 battery*6) |
Battery Indicator | 100%-50%: Green; 50%-30%: Yellow; 30%-10%: Red; Below 10%: Red Flashing; Below 5%: switch off |
Charging | Can be charged directly on the light, with battery over-discharging protection, polarity reversing protection |
Fully charging time | 8-10h |
With gas release valves | |
Operation voltage | 9V to 13V |
Waterproof | 200 meters underwater |
Dimensions | 213.5mm (length)* 78.0mm (dia. of head) |
Weight | 1140 grams (with battery pack) |
Underwater Weight | 560 grams (with battery pack) |
Impact resistance | 1.5M |
REPLACEMENT PARTS
CAT# DESCRIPTION
DG708 O-ring
DG709 Lens
ON/OFF
Push the switch to turn it ON.
MODES CHANGING
Successive push the switch ON-OFF within two seconds to cycle through High, Medium, Low, Red, OFF.
SCUBA DIVING APPLICATION
Check closely for cuts, scratches, or an otherwise damaged O-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the O-ring sealing surfaces.
KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.
CAUTION
If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please put the switch sleeve on light head during transportation to prevent it from misoperation.
The Light CAN’T be used more than 5 minutes above water.
If the switch gets stuck, please put some washing-up liquid in the slot of the switch and push the switch back and forward several times till it move smoothly again, then clean the light in the fresh water.