user login

4 LED 2Color Diving Light Rechargeable Diving Flashlight UV Underwater Video Light

Place of Origin: Zhejiang

Company Profile

Location: Shenzhen, Guangdong, China (Mainland)
Business Type: Manufacturer
Main Products: Underwater Dive Lights, LED Diving Light, Scuba Diving Lights

Product Detail

Model No.: D32VR

Product Description

4 LED 2Color Diving Light  Rechargeable Diving Flashlight UV Underwater Video Light

 

PRODUCT SPECIFICATIONS

 

Model D32V multifunction underwater photographing Light
 Bulb White CREE XM-L U2 LED *2 (max 1400 Lumens); Red CREE XP-E N3 LED*2 (max 200 Lumens)
Color temperature White LED: 5000k; Red LED: 610-630 nm wavelength
Three output levels White high>White low>Red
Runtime High: 90-120min, Low: 240 min, Red:: 210 min 
Reflector no hotspot design, no reflector
Lens 6mm Polycarbonate Board
Body material Durable aircraft-grade aluminum
Angle of light beam 120°
Surface treatment Premium Type III hard-anodizing
Color Black
Battery 32650 Li- ion battery *1
  With battery over-discharging protection, polarity reversing protection
Operation voltage 2.8V to 4.5V
Waterproof 100 meters underwater
Dimensions 133mm (length)*28mm (dia. of body)*60mm (dia. of head)
Impact resistance 1.5M
 Weight 290 grams (without battery); 430 grams (with battery)
Underwater Weight 320 grams (with battery)

 

BATTERY INSTALLATION

  1. Remove the tail by turning counter-clockwise.
  2. Remove used batteries and replace with fresh batteries as shown by the polarity stickers.
  3. Mount the tail by turning clockwise. DO NOT ACTIVATE IT YET.

 

 

BATTERY CHARGING

  1. Plug the charger in the wall power socket, the indicator light is green in the free-load status.
  2. Put the battery in the slot of the charger.
  3. The indicator light is red if the battery is not fully charged; it will turn green after fully charged.
  4. Take out the fully charged battery and use them in the diving light.

 

ON/OFF

 

Turn the tail clockwise until the light activates. DO NOT OVERTIGHTEN.

To turn the light off, back off the tail counter-clockwise until the light goes off.

Continue to back off for approximately one full turn to eliminate the possibility of the light activating accidentally in storage. For underwater use, backing off too much will allow water to enter past the o-ring.

 

 

 

MODES CHANGING

 

Successive switch ON-OFF within two seconds to cycle through high, low, red.

 

 

 

SCUBA DIVING APPLICATION

 

 

Check closely for cuts, scratches, or an otherwise damaged o-ring or mating lens surface as this can cause the light to flood under pressure. Remove any salt deposits, sand, dirt, or other foreign matter from the o-ring sealing surfaces.

KEEP THE THREADS, O-RING GROOVE LUBRICATED WITH SILICONE GREASE.

 

 

 

CAUTION

 

 

If the light is not to be used for some time, remove the batteries to prevent possible leakage or corrosion. Please remove the batteries during transportation to prevent it from misoperation.

 

 

 

WARRANTY RETURN POLICY

 

 

Please contact your local distributor or retailer for information on how to handle your warranty items.

 

 

 

REPLACEMENT PARTS

 

 

CAT#                  DESCRIPTION

D328                  O-ring

D329                  Lens

 

 

Post Buying Request