High Chrome White Iron Bolt Hole Mill Lining System For The Inner End Liners
| Place of Origin: | Jiangsu |
|---|
Company Profile
| Location: | Guangzhou, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Ball Mill Liners, Sag Mill Liners, Ball Mill Lining |
Product Detail
| Model No.: | DF102 |
|---|
Product Description
High Chrome White Iron Bolt Hole Mill Lining System For The Inner End Liners
Quick Details
1. We keep bolt hole center distance within 2mm;
2. We can supply 40Cr bolt units to match our side liners.
Bolt Hole for the Inner End Liners
1. We keep bolt hole center distance within 2mm;
2. We can supply 40Cr bolt units to match our side liners.
3. Cold shuts in the area of the bolt holes are not acceptable in liner plates.
Application :Conch Cement Mill
Material :high chrome white iron
Dimensions :As per drawing
Hardness :More than HRC56 ≥HRC56
Impact Value :More than10J ≥10J
Hardness Difference from Surface to Core :Less than HRC2 ≤HRC2
Surface Quality :Good surface quality after shot blasting
In the recent 20 years, our liners have been widely used in large, medium and small ball mills in Chinese power generation, mining, cement, Chemical engineering and metallurgical industries and super fine pulverizing equipments. It is the only recommended liner product in the latest standard of the electric-power industry in China.
Technical Parameters
Wuxi Orient Anti-wear Engineering Co., Ltd.
Chemical Composition & Mechanical Property of Wear-resistant Castings
|
Item |
Cr-Mo Alloy Steel I |
Cr-Mo Alloy Steel II |
Cr-Mo Alloy Steel III |
High Cr white iron |
High Cr Alloy Steel |
High Manganese Steel |
Ni-Hard cast iron |
|
C |
0.30~0.50 |
0.65~0.90 |
0.40~0.90 |
2.40~3.20 |
1.1~2.2 |
0.90~1.30 |
2.40~3.60 |
|
Si |
0.50~1.20 |
≤0.75 |
0.70~1.20 |
0.60~1.20 |
0.60~1.20 |
≤0.08 |
≤0.80 |
|
Mn |
0.40~1.20 |
0.50~1.20 |
0.60~1.00 |
0.50~1.00 |
0.50~1.00 |
11.00~18.00 |
≤2.0 |
|
Cr |
1.70~2.50 |
1.50~2.50 |
4.00~7.00 |
12.00~30.00 |
11.00~30.00 |
1.50~2.50 |
1.5~10 |
|
S |
≤0.04 |
≤0.06 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.04 |
≤0.15 |
|
P |
≤0.04 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.06 |
≤0.15 |
|
Mo |
≤0.5 |
≤0.5 |
≤0.5 |
0.10~3.0 |
0.10~3.0 |
≤1.0 |
≤0.10 |
|
Cu |