Place of Origin: | Guangdong |
---|
Location: | shenzhen, Guangdong, China (Mainland) |
---|
Model No.: | TK700 |
---|
Controls: AC power switch CH1 & CH2 Channel Gain Control
POWER LED: green LED × 2
SIGNAL LED: green LED -30B × 2 yellow LED -60B × 2
CLIP LED: red LED × 2
PROTECT LED: red LED × 2
Jacks and Controls on Back Panel:
AC power switch CH1 & CH2 Channel Gain Control
Signal Input Jack: XLR balance input (1 ground 2 positive 3 negative)
Mode Selection: stereo. dual channel (parallel signal). bridged
Low Frequency Cut: minus 30Hz
Housing ground lift switch selected grounding: selected grounding
Output Jack: SPEAKON or post
Power:power input jack , fuse, voltage select switch
Cooling system. Two Φ80 fans auto speed high low adjustment according to temperature, thermostat set at 55 degrees!
Amplifier Protection: short circuit protection, subsonic frequency protection, RF protection, clip protection,soft start equipment,overheat and output voltage protection.
Overload Protection: no thumps or pops are heard with turn-on /turn-off of speaker System overload automitic power-cut.filter setting prevents peak overload of woofer.limiting setting prevents high frequency clipwave and thus avoid tweeter damage.
Output circuit types: efficient complementary linear output.
TK2000: third level power on/off, TK700, TK1100, TK1500 second level power on/off, TK300: no level.
Power voltage: 100 V 120 V select switch, 220 V 240V select switch, 50Hz/60Hz, other voltage availa if customised.
Dimension: 88mm × 483mm × 480mm
Weight: 24KG
------------------------------------------------------------------------------------
Contact person: Fancy Zhang
Email: fancy.zhang@c-mark.com.cn
MSN: yezi227@hotmail.com
Cell: 0086 13425157873