Trunk Cable P 565 JCAM Seamless Aluminum Tube with Messenger for CATV Network
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Shenzhen, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | CCTV Coaxial Cable, CATV Coaxial Cable, Signal Coaxial Cable |
Product Detail
| Model No.: | P 565 JCAM Trunk Cable |
|---|
Product Description
Trunk Cable P 565 JCAM Seamless Aluminum Tube Messenger for CATV Network
Quick Detail:
- P 565 JCAM Trunk Cable
- 0.129 Inches /3.28mm CCA
- 0.519 Inches /13.20mm FPE
- 0.565 Inches /14.35mm Aluminum Tube
- 0.625 Inches /15.86mm PE
- 500M, 1000M, Wooden Drum, Pallet
- MOQ: 5KM
Description:
KT0205 P 565 JCAM Trunk Cable, 3.28mm CCA Conductor, 15.86mm PE Jacket, Messenger
has the highest reliability and flexibility of any Trunk and Distribution coaxial cable, low RF attenuation and an unprecedented 10 year warranty.All QR ans PS cable products offer tough polyethylene jackets and a standardized, environmentally sealed connector interface engineered for reliability and craft friendliness.
QR and PS cable offers lower attenuation than larger traditional products, with unmatched flexibility,
reliability and cost effectiveness. QR and PS cable is optimized for use in broadband feeder plants. It can also be used for very low attenuation antenna/headend connections.
Standard QR and PS cable Construction is comprised of:
Aluminum Strip – formed and continuously RF welded around a high compression microcellular foam dielectric core, minimizing RF egress and ingress and the rigidity common in traditional coaxial products.
Shield – fully bonded to the dielectric core, as is the copper clad aluminum center conductor.
Polyethylene Jacket – applied standard, which enhances cable reliability and allows QR and PS cable's unique connector technology to form an environmental seal.
Applications:
Trunk coaxial cables are connected to the optical node and form a coaxial backbone to which smaller distribution cables connect.Trunk cables also carry AC power which is added to the cable line at usually either 60V or 90V by a power supply and a power inserter.
| KT0205 P 565 JCAM Trunk Cable, 3.28mm CCA Conductor,15.86mm PE Jacket, Messenger | ||
| Construction Parameters: | ||
| Inner Conductor | 0.129Inches /3.28mm | Copper Clad Aluminum |
| Dielectric | 0.519Inches /13.20mm | Foamed PE |
| First Shield | 0.565Inches /14.35mm | Welding Smooth Aluminum Tube |
| Shield Thickness | 0.023Inches /0.58mm | |
| Jacket | 0.625Inches /15.86mm | PE/ Flame Retardant PE |
| Jacket Thickness | 0.030Inches /0.76mm | |
| Messenger | 0.109Inches /2.77mm | Steel |
| Electrical Characteristics: | ||
| Capacitance(pF/m) | 50 ± 3 | |
| Impedance(ohm) | 75 ± 2 | |
| Velocity of Propagation (%) | 89 | |
| Inner Conductor DC Resistance(Ω/km) | 3.15 | |
| Outer Conductor DC Resistance(Ω/km) | 1.12 | |
| Loop DC Resistance(Ω/km) | 4.26 | |
| Mechanical Characteristics: | ||
| Min.Bend Radius(mm) | 127 | |
| Max.Pulling Tension(kgf) | 159 | |
| Max.Breaking Strength of Messenger(kgf) | 816 | |
| Attenuation(20): | ||
Frequency (MHZ)
You Might Also Like | ||
