WCB Carbon Steel Investment Casting of cover top plate for valve with CNC Machining
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Suzhou, Jiangsu, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Forged Steel Rings, Forged Rolled Rings, Stainless Steel Forged Rings |
Product Detail
| Model No.: | Carbon Steel Investment Casting 011 |
|---|
Product Description
WCB Carbon Steel Investment Casting of cover top plate for valve with CNC Machining.
Quick Detail:
1. Valve component cover top plate cast by lost wax Casting method;
2. Material: WCB;
3. Size: 140X50X20mm;
4. Weight: 0.38kg;
5. Chemical composition tested by German spectrometer;
6. Perfection process: Ball blasting and CNC machining;
7. NDT can be operated.
Description:
WCB lost wax castings for valve component- cover top plate , weightw from 20g up to 80kg. We can trace the production route with heat number.
We perform stainless steel lost wax castings in a wide range of spectro range, please refer to below table for the most common material that Winnington cast:
|
Stainless Steel (70%) |
Carbon Steel |
Alloy Steel |
|
CF3M (AISI 316L), CF8M (AISI 316), CF8 (AISI 304),CD4MCu, CD4MCuN,ANC20,1.4408,1.4517, 1.4306, 303, 430, 420, 17-4PH, SCS1 and more |
SCS16, SCS14, SCS13, 1.0619, WCB, WCC,S355JR, 1045 , LCC and more |
ANC2,CLA12C,42CrMo,8Q,4140,6150 and more |
Description of Investment Casting Process:
1.DIE MAKING
A wax die is designed and built to produce castings per customer specifications.
2. WAX PRODUCTION
A wax pattern is produced from the wax die which works a wax injection machine.
3. PATTERN ASSEMBLY
Wax patterns are attached to runner system by hot knife.
4. CERAMIC SHELL MAKING
The pattern assembly is dipped into a ceramic slurry, coated with a refractory material and get dried. The process is repeated until the desired thickness and strength is achieved.
5. DEWAX
A high-pressure autoclave melts and remove the wax from the ceramic shells.
6.SHELL PREHEAT
High temperature ovens cure and preheat the ceramic shells before pouring.
7. CASTING
Pre-heated Ceramic cluster are poured with the molten metal.
8.KNOCK OUT
The ceramic shell is removed by vibration knocking.
9.CUT OFF
Castings are cut off from the gating system.
10.MACHINING,SURFACE FINISH,AND INSPECTION
After cut off and gate removal, all secondary finishing operations like linlishing, shot blasting, CNC machining are performed. Each casting is inspected according to customer specifications and requirements.
Specifications:
|
Casting Wall thickness |
Min 1.5-2mm |
|
Standards |
ASTM,JIS,DIN,BS,MIL |
|
Casting weight |
20g~80kg |
|
Casting process type |
ceramic shell lost wax casting |
|
Machining |
CNC machining,CNC lathe |
|
Surface finish |
electro polishing, satin, hand polished, pickled, zinc plating |
|
Tolerances |
Raw Casting tolerances in drawing are according to DIN VDG-Merkblatt P-690; Dimension less than or equal to 24mm will in accordance to D1 standard; Dimension greater than 24mm will in accordance to D2 standard |
Applications:
Competitive Advantage:
For lost wax casting method:
- Allows greater design freedom high complexity parts
- Can cast a wide variety of alloys even which melting temperature is higher than die steel
- Yields lighter, stronger metal parts with superior finishes
- Reduces greatly on tooling and machining costs
- Possible for rapid prototype development
For Winnington:
