Place of Origin: | Zhejiang |
---|
Location: | Dongguan, Guangdong, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Laser Engraving Cutting Machine, Laser Cutting Machine, Laser Engraving Machine |
Model No.: | Focus lens |
---|
Dia. 25mm laser machine reflect mirror for Laser Machine Spare Parts
As a vitally important laser element of laser mechanical equipment spare parts, the laser mirror can reflect lights according to a particular route or direction. There are two kinds of commonplace laser mirrors, namely molybdenum laser mirror and silicon laser mirror, and Eastern Laser offers both top-notch laser mirrors with high reflectivity and high durability. The laser lens with a long service life is suitable for operation in terrible environment and compatible with various laser machines from different manufacturers.
Technical Parameters of Laser Mirror
Molybdenum laser mirror |
||
Diameter (mm) |
Thickness (mm) |
Material |
20 |
3 |
Molybdenum |
25 |
3 |
Molybdenum |
30 |
3 |
Molybdenum |
Silicon laser mirror |
||
Diameter (mm) |
Thickness (mm) |
Material |
20 |
3 |
Silicon |
25 |
3 |
Silicon |
30 |
3 |
Silicon |
When using infrared optical elements (like laser focus lens), please take the following precautions seriously:
1. When using optical elements, you should always wear powder-free finger cots or rubber / latex gloves in that dirt and oil stains will seriously contaminate optical elements, resulting in a significant decline in performance.
2. Do not use any tool to manipulate optical elements, including tweezers.
3. For the purpose of protection, optical elements should always be placed on provided lens paper.
4. Do not place optical elements on hard or rough surfaces because infrared optical elements can be easily scratched.
5. Do not clean or touch the surface of exposed gold or copper.
6. All materials used to produce infrared optical elements are fragile, whether they are single crystal or polycrystalline, whether the grains are large or small. The materials are not as strong as glass, and they can not bear the same procedures as those of glass optical elements
7. Because when you clean optical elements installed on frames, a variety of problems may occur, it is recommended that you only resort to the cleaning procedures described here for the optical elements not installed.