Min. Order: | 1000 Square Meter |
---|---|
Trade Term: | FOB |
Payment Terms: | T/T |
Supply Ability: | 5000sq.m per month |
Place of Origin: | Jiangsu |
Location: | Wuxi, Jiangsu, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | FRP Grating, FRP Decking, FRP Fencce |
Means of Transport: | Ocean, Air, Land |
---|---|
Name: | Fiber Reinforced Plastic roof panels |
Color: | yellow,green,gray |
Raw material: | Fiberglass and resin |
Technique: | molded technology |
Payment: | 30%T/T in advance, 70% balance before shipment |
Production Capacity: | 5000sq.m per month |
Packing: | Pallet &Carton for FRP grating,or customized |
Delivery Date: | within 20 days after the contract signed |
Physical properties:
Tensile strength | 80-100Mpa |
Flexural strength | 0-110 Mpa |
Density | 1.4-1.6g/cm³ |
Pasteur | ≥40 |
Heat conductivity factor | 0.67-0.96kv/m.h.°C |
Temperature range | -40°C—+60°C |
Water absorption | 24 hours ≤0.32% |
Wind loading rating | below 8 levels |
Curing degree | ≥82% |
Product classification:
Plate type | thickness(mm) | width(mm) | |
Flat plate | 0.7-4.0 | ≤1400 | |
Sine wave | 0.7-4.0 | ≤1200 | |
Trapezoidal wave | 0.7-4.0 | Mating with pressure plate | |
Fire resistance | Ordinary type |
The technical standards of frp roof panels
Good tenacity. No cracking phenomenon when driving nails in roof installation.
Having close combing with color steel plate. Cross-section thickness is uniform. The shape of FRP is consistent with steel plate.
Transmittance loss rate is low. No yellowing phenomenon after long term service.
Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold.
Light through FRP assumes scattering shape and gentle.
Bright and clean appearance. No distinct air bubble and cracking on FRP.
Anti-ultraviolet and anti-chemistry corrosion.
Anti-aging and anti-pulverization.
Long service life.