3-Phase John Deere Diesel Generator
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Dongguan, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Genset Diesel Generator, Cummins Diesel Generators, Perkins Diesel Generator |
Product Detail
| Model No.: | BCJD 22-50 |
|---|
Product Description
- Generater Model:BCJD 22-50
- Frequency:50 Hz
- Cooling Method: Water
- Power Factor:0.8
- 3 phase
- Prime Power:19KVA/15KWe
- Standby Power : 21KVA/17KWe/28Amps
3-Phase Single Bearing John Deere Diesel Generator , 3029DF128
Definition of Ratings & Reference Conditions
Prime Power (PRP) is the nominal output continuously available, where the average load (variable) does not exceed 70% of the prime power rating. 10% overload is available for a maximum of 1 hour in 12 hours of operation.
Standby Power (LTP) is the maximum output available, for up to 500 hours per year, where the average load (variable) does not exceed 70% of the standby power rating. No overload is available.
Standard Reference Conditions: air temperature 25°C (77°F), barometric pressure 99kPa, [110m (361ft) altitude], 30% relative humidity.
Note: The above ratings may be subject to derate at different operating conditions. Please see the Derate Guidelines on the Broadcrown Website.All power ratings and reference conditions in accordance with ISO 8528-1 and ISO 3046-1.
Key Features:
Efficient water cooled John Deere diesel engine.
Single bearing CGT Stamford alternator
Radiator with pressure cap and drain point
Fully guarded engine-driven fan
Fully welded steel skid base with fork lift pockets
Integral fuel tank with filler cap and gauge
Heavy duty rubber anti-vibration mountings
12V starter battery and connecting cables
Separate engine-driven battery charging alternator
Spin on oil and fuel filters and dry type air filter element
Industrial silencer (15dBA reduction) supplied loose
Key Start control system with analogue instruments
Main line circuit breaker
Factory Test Certificate
Operation & Maintenance Manual
Wide range of optional extra features available
STANDARD CONTROL SYSTEM
BC 7210 Digital Auto Start
The standard control system for this model is the BC 7210 Auto Start system, based on the DSE 7210 control module, which provides :
Automatic remote start
Overspeed protection
Underspeed protection
Low oil Pressure protection
High coolant temperature protection
Fail to Start indication
Automatic cool-down timer function
Optional - Common Alarm & System In Auto volt-free contactsTogether with digital displays for :
Volts, Amps and Frequency
Engine operating hours
This system also has an increased digital input/output count for external options and, being cost effective in comparison with the optional (BC 701) analogue system, is the preferred choice for most customers.
CONTROL SYSTEM OPTIONS
BC 7310 & BC 7320 control systems (just the DSE modules shown here) provide complete power monitoring and protection facilities.Compared to BC 7210, addition features include :
Pre-alarms for Low Oil Pressure and High Coolant Temperature
Digital display of kW, kVA and Power Factor
Under/Over Volts protection Over Current Protection
Full RS485 Telemetry implementation as well as full SAE J1939 CANBus implementation. In fact, all generating sets driven by engines with onboard ECU/CANBus come with this system as standard.
The BC 7320 provides full AMF functionality with integrated mains monitoringand generator/mains contactor control.
BC 8610 & BC 8620 control systems provide the same features asBC 7310 & BC 7320 respectively, plus :
BC 8610 - Set-to-Set Synchronisation
BC 8620 - Single Set-to-Mains Synchronisation with integrated mains monitoring
For Multi Set-to-Mains synchronisation, each set requires BC 8610 with the addition of one mains monitoring panel BC 8660 (not illustrated).See the Synchronisation Guidelines for further details.
The optional control system for this model is BC 701 (photo), based on the Deep Sea Electronics DSE701 Key Start controller.This provides for the manual control of the generator via a two-position key switch and membrane push button for Start, together with Overspeed, Low Oil Pressure and High Coolant Temperature protection.
LED indications for protection operation & charge alternator fail
Analogue voltmeter with 7-position selector switch
Analogue ammeter with 4-position selector switch
Analogue frequency meter
Analogue gauges for Oil Pressure, Coolant Temp & Charge Amps
Engine hours counter
Emergency Stop button
One auxiliary input for optional features
Optional - analogue kW meter, Generator Running volt-free output
The panel is constructed in 1.5mm steel, powder coated to RAL9001 for a high quality, durable finish with side-hinged door.
You Might Also Like
