Waterproof Two Way Water Valve / Fan Coil Unit Valves in DN15 DN20 DN25 DN32 Size

Waterproof Two Way Water Valve / Fan Coil Unit Valves in DN15 DN20 DN25 DN32 Size

Description:

Well waterproof and dustproof features (IP65)
High Differential pressure up to 1MPa and strict closure
High flux and no sediment due to direct flow through of valve
Soft shut-off and open to eliminate water hammer in most applications
Motor does not bear any forces when valve is not in motion, extending service life
Actuator can not be affected by temperature of valve and environment
Quick and easy replacement by movable actuator
The actuator can be installed after the application and pipe was fixed that is efficient for installation,
Valve can be mounted near to wall because of actuator’s off-center configuration
Valve can be operated by general tools when actuator has been removed
The actuator is available for all of 1/2″1 1/4″ ball valves
Actuator installation allows for 2 different wiring orientations, thus providing ease of wiring and service

Specifications

Medium:Cool/heat water or 60% glycol

Size:DN15,DN20,DN25,DN32

Structure: Two way or Three way

Operating Mode:on/off or 3-point control (24Vac)

Power Supply:110Vac,220Vav,24Vac etc.

Power Consumption:5W (during valve position change)

Running Times:15 sec.

Pipe Fitting:NPT internal thread

                     Optional: BSPP external thread

                     BSPP internal thread

                     BSPT internal thread

                     Compression external thread

Materials

Body:forged brass, nickel plated

            Ball:chrome plated brass

            Stem:brass

Seats:fiberglass reinforced teflon PTFE

Seal:2 EPDM O-rings, lubricated

Pressure Rating:2MPa

Media Temp. Range:1 to 95

Max. Differential Pressure:1MPa

Protection Grade:IP65

Types:2-way Valve,3-way Valve (side)3-way Valve (base)