Custom Design Powder Paint Coating Line For Hardware Products

powder painting line / powder spraying line

1. computer casings powder coating line

2. electric water heater shell powder coating line

3. aluminum powder coating line 

Custom Design Powder Paint Coating Line For Hardware Products

Design quality of the coating equipment and technology design, the use of coating production line is essential. If the coating equipment is poorly designed process, even if the single piece of equipment, no matter how produced, the entire coating production line is not good.
   

The coating equipment process design typical common errors are listed below:

Yield less than the design: some design does not consider painting equipment hanging not consider hanging Pitch, without considering on the downhill horizontal turn interferometer, production time does not consider the rejection rate, coating equipment utilization, peak production of the Programme capability. Causing output to reach design briefs.
   

Coating equipment and technology is not enough: some design in order to reduce the cost by reducing the process time to achieve their goals. Common, such as: coating production line pre-treatment transition section to lack of time, resulting in the string solution; curing does not consider the heating time, resulting in poor curing; paint leveling time is not enough, causing the film leveling is not enough; enough cured cooling, spray paint (or lower member) workpiece overheating.
   

Transportation equipment poorly designed: the workpiece is to be transported a variety of improper design, production capacity, process operation, the upper and lower parts will have adverse consequences. Common suspension chain conveyor, its load capacity, towing capacity needs to be calculated and interference drawing. The speed of the chain supporting equipment must have the corresponding requirements. Coating equipment for smooth chain, synchronization requirements.
   

Improper selection of painting equipment: also different due to the different product requirements, equipment selection, and a variety of coating equipment has its advantages, there are also disadvantages. The design can not explain to the user the manufacturing found very dissatisfied. Example, spray drying tunnel the air curtain insulation, cleanliness requirements of the workpiece is not installed purification equipment. This type of error is the most common mistakes in the process design of the coating equipment.
    Coating equipment, operating environment, painting, coating processes and materials directly related to the production efficiency of the coating line. In this process, the process design of the coating equipment the use of the coating line has an important influence, we continue to understand painting equipment process design typical mistakes.
    Coating equipment, process parameters inappropriate choice of: coating production line process parameters error of the more common single coating equipment design parameters are chosen lower limit, the second is not paid enough attention to the equipment supporting, no Design.
   

Supporting coating equipment missing items: more coating line associated equipment, sometimes in order to reduce the quote, eliminating the need for some equipment. Also failed to explain to the user, resulting in wrangling. Common pre-treatment heating equipment, spraying equipment, air equipment, exhaust pipe equipment, environmental protection equipment.
   

Not consider painting equipment energy-saving: energy prices is changing rapidly, and the design failed to consider these issues, allowing users to higher production costs, some users had to use a relatively short period of time to reinvent and purchase of equipment.

Our commitment to free technical guidance and tailored a new enterprise for own low-input high return process, we will make their own efforts to build a bridge to communicate with each other and common development for the enterprise and between enterprises.