Place of Origin: | Zhejiang |
---|
Location: | Hangzhou, Zhejiang, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Plastic Injection Molding Machine, Servo Energy Saving Injection Molding Machine, High Speed Injection Molding Machine |
Model No.: | HCW2000 |
---|
HCW2000 Hydraulic Plastic Injection Molding Machine With Vickers Valve
Quick Detail:
HCW2000 Plastic Injection Molding Machine is for normal type plastic material injection, e.g. PC, PP, PE, Nylon, A.B.S. PVC etc., this machine is with clamping force 2000tons, there are four available screws, the corresponding real shot weight 8608g, 10226g,11739g,13356g. This machine is mainly used to produce middle&big industrial parts, household appliances and other plastic products.
Competitive advantages:
1. Heaters adopt ceramic, the using life is double than stainless steel.
2. Machine with oil filter system to ensure hydraulic oil clean , to prolong action valves using life.
3. The machine equipped with 7 inch colorful screen controller, brand Techmation from Taiwan, the controller is with several languages include English, French, Spanish, Portuguese, Russian, Arabic etc.
4. The machine equipped with hydraulic protection
5. The machine equipped with double Hydraulic pulling device
6. The machine equipped with double Air Ejector
7. The machine equipped with single slots on the mold plates
Description:
HCW2000 injection molding machine is the type of fully automatic machine, being provided with high
efficiency, high reliability, high speed, low noise, low power consumption and other advantages.
Machine main components adopt world famous brand, e.g.:
• PLC: TECHMATION CONTROLLER(Taiwan)
• AC Contactor: SIEMENS(Germany)
• Travel switch: SCHNEIDER(FRANCE),
• Transducer: NOVOTK (Germany)
• Proportional Valve: HNC(TAIWAN)
• Oil pump: VICKERS(USA)
• Directional Valve: VICKERS(USA)
• High-pressure pipe line: GOOD YEAR (USA)
Specifications :
INTERNATIONAL CLASS NO | HCW2000 | ||||
A | B | C | D | ||
INJECTION UNIT | |||||
Screw diameter | mm | 130 | 140 | 150 | 160 |
Screw L/D ratio | L/D | 25.9 | 24 | 22.4 | 20.9 |
Shot volume(theoretical) | cm3 | 9460 | 11238 | 12900 | 14678 |
Injiection weight(ps) | g | 8608 | 10226 | 11739 | 13356 |
Injection rate | g/s | 1172 | 1360 | 1560 | 1776 |
Injection pressure | Mpa | 190 | 163 | 142 | 125 |
Screw pressure | rpm | 70 | |||
CLANPING UNIT | |||||
Clamping force | kN | 22000 | |||
Open stroke | mm | 1600 | |||
Space between tie bars(W×H) | mm | 1650×1500 | |||
Max.Mold height | mm | 1620 | |||
Min.Mold height | mm | 800 | |||
Ejector stroke | mm | 420 | |||
Ejector force | kN | 490 | |||
OTHERS | |||||
Max.Pump pressure | MPa | 16.5 | |||
Pump motor power | kW | 45+55+55 | |||
Heating power | kW | 110.7 | |||
Machine dimension(L×W×H) | m | 17.80×3.35×4.28 | |||
Oiltank cubage | L | 3700 | |||
Machine weight | t | 156 |
PLATEN SIDE