4 in 1 Remote Dog Training Collar

4 in 1 Remote Dog Training Collar (P-998C)

Main Features:

4 in 1 remote dog training collar

250 meters range

Receiver: AAA 1.5V battery

Transmitter: 9V battery

One level of vibration and static electricity shock

Four functions: Instant static impulse+ vibration+ Whistle signal+ LED light

With the adjustable whistle switch and ON/OFF switch in the transmitter

Vibration induction power switch in the collar receiver, it will turn on and turn off automatically to save power

Product details:

This is an electronic dog training system with a working range up to 800 feet. This compact, easy to operate system will control bad behavior and dogs who run off when taken outdoors for exercise. You do not need to worry about your dog when out of control. It could also help you achieve a well trained and contented dog within days. Please kindly note that it is suitable for small, medium and large dogs up to 70 lbs.

 Features:

1. Designed in USA, Used for mild-mannered to stubborn pets.

2. Reliable and cost-efficient design.

3. Strong static impulse can penetrate hair of pet and fabric within 6mm thick, no discharging point will touch skin of pet. 

4. Static impulse can quickly and effectively correct deeds of your pet. 

5. The warning vibration will let the pet associate the vibration with static impulse. In the end, vibration will achieve the same effect as the static impulse.

6. Both static impulse and warning vibration are set with automatic stop to protect pet from continuous reprimanding. 

7. With automatic on/off switch of vibration induction power on collar receiver.

8. Water resistant Collar, but you can't immerse it into water and use it in the storm.

9. LED flashlight helps you find your pet easily at night.

How to match the receiver and transmitter:

1. Turn on the transmitter by the switch on right side of it

2. Install the batteries of the receiver. The LED inside the receiver starts to keep flashing. Press vibration or shock button immediately after batteries are put into the receiver firmly. Then the LED will stop flashing and only light which indicates that the transmitter and the receiver have matched each other successfully.

3. If LED stops flashing on its own without press any button in the transmitter, take out the batteries. Wait for at least 10 Seconds and try step 2 again.

4. Put the cover on the receiver firmly

5. Attach the receiver to the collar.

Packing content:

Packing list:

G-Box Size: 15.8*10.5*120px              

CTN: 44*34*850px             

Qty/CTN: 42pcs/ctn

N.W: 14kg

G.W: 15kg