Air-Cooled Xenon Arc Meter

Air-Cooled Xenon Arc Meter 

1.     MODEL NO.

 YG611T (Desktop type) Air-Cooled Xenon Arc Meter 

2.     APPLICATION

    Air-Cooled Xenon Arc Meter is designed to simulate and strengthen sunlight spectrum that reaches the ground by xenon arc lamp as light source, and supplemented by temperature control, and water spray conditions. This kind of xenon tester is suitable for various kinds of materials, such as textile, leather, plastic, rubber, painting, dyestuff etc.

3.     STANDARDS

Note: this  Air-Cooled Xenon Arc Meter can conform to but not limit to the standards above, for more standards conformance, please contact us.

4.     KEY SPECIFICATION

• Tray size (area)                251×457mm (28675px2)

• Distance between tray and lamp   230~280mm

• Xenon lamp                  1800W with life 1800h (Q-SUNTM lamp)

•                             2500W with life 1500h (made inChina)

• Spectrum wavelength           290nm~800nm

• Lamp irradiance                  

• average 60W/m2, max 200W/m2 between wavelengths for Q-sunTM lamp

• average 100W/m2, max 550W/m2 between wavelengths for Chinese lamp

• average UV irradiance between 290nm~400nm

• less than 2W/m2 for spectrum wavelength lower than 300nm

• Photoperiod                  1~999hour (adjustable)

• BlackPanel temperature (BPT)        35℃~100℃±3℃

• Temperature fluctuation         ≤±0.5℃

• Temperature unevenness        ≤±2℃

• Heating power                2kW

• Rainfall interval               0~240min (adjustable)

•  Rainfall water pressure         0.12~0.15MPa

• Water spray interval           18min/102min (spray /not spray)

• Spray nozzle diameter          Ф0.8mm

•  Work chamber size            380×500×350mm (D×W×H)

•  Dimension                   520×770×630mm (D×W×H)

• Power supply                 AC220 V±10% 50Hz

• Net Weight                      105kg

5.     FEATURES

• Tester body materials

• Out shell uses high quality A3# steel board and carries on spray treatment, bright, beautiful and easy to clean;

• Work chamber material is high quality SUS 304# stainless steel board;

• Use double layer, resistance to high temperature rubber sealing strip between door and test chamber to ensure test area to be sealed;

•  No-reaction door handle to operate easily.

•  Circuit control system

• Temperature control elements are imported high quality digital display microcomputer intergraded controller (made inKorea);

• High precision: 0.1℃

• Output powers of temperature are calculated by microcomputer to get high control accuracy and save energy;

•  Arc lamp system

• Use high quality metallic blackboard thermometer;

• Arc lamp: imported high quality and certified lamp (Q-SUNTM,USA), with lamp life 1600~1800 hours;

• Provide two types of irradiance monitor methods optionally, hand-held type radiometer and embedded type radiometer;

• Monitor wavelength bandwidth selectable,

• 297nm, 313 nm, 340 nm for narrow bandwidth;

• 320~400 nm, 350~450 nm, 400~1000 nm for wide bandwidth.

•  Spray system (optional)

•  Deionized water with solid contents less than 20ppm;

• Equipped with water tank level displayer;

• Water sprayed is recyclable;

• Spry water pressure is adjustable between 0.12~0.15MPa;

• Equipped two spray heads on the top of working chamber.

•  Protection system

• Over temperature protection;

• Over temperature and over current protection for water pump;

• Power leakage protection;

• l  Auto-stop after fault alarm.

• Installation environment

• Environmental temperature:  20±2℃;

• Environmental relative humidity: ≤65%±2

• Power supply requirements: AC220 V ±10%  50Hz  single phase three lines

• 
  

6.     STANDARD CONFIGURATION

7.     OPTIONAL ACCESSORIES

 Related photoes :