Place of Origin: | Zhejiang |
---|
Location: | Ningbo, Zhejiang, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Plastic Injection Molding Machine, Hydraulic Injection Molding Machine, Horizontal Injection Molding Machine |
Model No.: | HI-P328 |
---|
Plastic Injection Molding Equipment , 398Tons PET Bottle Preform Making Machine
Quick Detail:
HI-P398 PET Preform Injection Molding Machine is special for PET perform injection molding, clamping force 398tons, real shot weight 1700g.
Machine main components adopt world famous brand, e.g.:
• Controller:TECHMATION (TAIWAN),
• Low voltage contactor: SCHNEIDER(FRANCE),
• Low voltage air switch: SCHNEIDER(FRANCE),
• Proportional Valve: Dofluid HNC(TAIWAN)
• Oil pump: VICKERS(USA)
• Directional Valve: VICKERS(USA)
• Induction travel switch: OMORON (JAPAN)
• Inductor potentiometer: FORT(USA)
Description:
HI-P398 PET Preform Injection Molding Machine adopted special prolonged screw, three R/D of screw, 21:1 / 23:1 / 25:1, are available, this machine is used to produce PET performs with weight 18g-900g, neck size 15mm to 120mm.
HI-P398 PET Preform Injection Molding Machine is the type of fully-automatic machine, being provided with high efficiency, high reliability, high speed, low noise, low power consumption and other advantages.
Applications:
Available mold cavities on HI-P398 PET Preform Injection Molding Machine:
For PET perform 16g-55g, 28mm PCO, 25mm/30mm, 38mm, mold cavity can be: 8-Cavities, 16-Cavities, 24-Cavities, 32-Cavities, 48-Cavities,
For PET perform 50g-900g, 45mm oil neck, 55mm gallon bottle preform, 60mm-120mm wide mouth, mold cavity can be: 1-Cavity, 2-Cavities, 4-Cavities, 6-Cavities, 8-Cavities, 12-Cavities, 16-Cavities,
Specifications:
HI-P398 Technical Parameters
HI-P398 |
Parameters (Special design for PET) |
||
TECHNICAL PARAMETER TABLE |
Unit |
||
INJECTION |
SCREW DIAMETER |
mm |
80 |
SCREW L/D RATIO |
L/D |
25 |
|
SHOT VOLUME(THEORETICAL) |
cm3 |
1689 |
|
INJECTION WEIGHT(PET) |
g |
1788 |
|
INJECTION PRESSURE |
Mpa |
152 |
|
INJECTION RATE |
g/s |
446 |
|
PLASTICIZING CAPACITY |
g/s |
70 |
|
SCREW SPEED |
rpm |
0-165 |
|
CLAMPING |
CLAMP FORCE |
Kn |
3980 |