Place of Origin: | Jiangsu |
---|
Location: | Suzhou, Jiangsu, China (Mainland) |
---|---|
Business Type: | Manufacturer |
Main Products: | Steel Slitting Line |
Model No.: | ZJX-2X1250 |
---|
Automatic Slitting Line Machine For Carbon Sheet With Hydraulic System
Specifications:
Application: |
CR/HRC/stainless steel /galvanized and so on |
thickness of coil plate: |
0.3-2mm |
width of coil plate: |
1250mm |
coil weight: |
10MT(max) |
coil I.D: |
508 |
coil O.D: |
1600mm |
the diameter of slitting blade shaft |
180 |
slitting blade: |
Φ180Xφ320X20 |
material of slitting blade: |
6Crw2Si |
the hardness of slitting blade: |
HRC58°-60° |
recoiler I.D: |
φ508 |
power: |
380V/50Hz/3Ph |
tolerance of width error: |
≤±0.05mm/2M |
line speed |
0-120m/min |
area of the whole machine: |
30m(L)x6m(W) |
Production orientation |
from left to right |
ZJX-0.2-2X1250mm full automatic slitting line is used for slitting the carbon plate to prepare for the next process.
1. Hydraulic entry coil car
The car can move levelly and vertically, which is convenient for putting the steel coils into the de-coiler.
It is driven vertically by hydraulic cylinder with four guide pillars.
The level movement is driven by 1.5KW cycloidal motor.
2. Hydraulic cantilever un-coiler
Supporting steel rolls and uncoiling.
It can expand and shrink with hydraulic oil cylinder and fit with the inner hole of the steel coils and is equipped with supporting stand.
Moment motor drives the coils running and the motor can run right and left to prevent the coils running by inertia.
3. Hydraulic press and pinch and feed device
Two hydraulic oil cylinders control the lifting of rollers.
Hydraulic telescopic shovel and hydraulic press and hit the head device, etc to feed the plate.
Hydraulic pinch and feed device: driven by the cycloid pinwheel decelerator and equipped with hand clutch. The pinch rollers adopt the hydraulic oil cylinder to press down. It is driven by down rollers.
4. Hydraulic head-cutting machine