High Density 8 Channel IPTV MPEG-2 SD Encoder With IP ASI Output

8-Ch MPEG-2 SD Encoder

1: Support 8 ch MPEG-2 SD encoding

2: IP / ASI output 

Product Overview

      GN-1838 is GOSPELL’s latest highly cost effective and high density MPEG-2 SD encoder which can perform MPEG-2 compression encoding for up to eight channels of analogue composite video and stereo pairs signals simultaneously, and then output the signal through ASI and IP interfaces after multiplexing. It supports 1+1 redundant output via dual ASI and (or) TS-over-IP interfaces, and with Web browser and SNMP management, these features make it more reliable, flexible and much more easy to deploy, in conventional or even IP based DTV head end systems.

Main Features

· Up to eight channels of SD encoding in 1RU;

· High picture quality in ultra low bit rate to reduce network overheads;

· Web browser and SNMP management for local and remote management and control;

· Dual Ethernet output, Supporting 1+1 redundancy

· MPEG TS-over-IP(7 x 188 Byte) output, support MPTS/SPTS mode

· Supports video encoding rate range from 1Mbps to 7Mbps

· Multiple resolutions: PAL: 720 x 576, 704 x 576, 640 x 576, 544 x 576, 352 x 576@50Hz

  NTSC: 720 x 480, 704 x 480, 640 x 480, 544 x 480, 352 x 480@60Hz

· Supports VBR/CBR video encoding

· Supports simple TS multiplex with auto generated PSI/SI

· Low power consumption

· Front panel control and LCD display

· Auto saving of user configuration for the recovery of previous working status

· Malfunction alarm display

Analog Video/Audio Input
Composite Video	8 x CVBS
	BNC female, 75W
Unbalanced Audio	8 x Stereo pairs (R&L)
	BNC female, 600W
	Stereo or Mono mode
ASI Transport Stream Input
Numbers of ASI Input	2 x ASI
Connector	BNC female, 75W
TS Packet Length	188 or 204 Bytes
ASI TS Multiplexing Output
Numbers of ASI Output	2 x ASI
Output Mode	Redundant output
Connector	BNC, 75W
TS Packet Length	188 Bytes
PSI Processing	PAT, PMT, NIT Insertion
MPEG TS-Over-IP Output
Numbers of IP Output	2 x 10/100 Base-T Ethernet
Output Mode	Redundant output
TS Format	7 x 188Byte of MPEG TS-over-UDP
TS Output Mode	MPTS, SPTS
Addressing	Unicast or Multicast
Network Protocol	UDP, IGMP
Connector	RJ-45
Video Encoding
Encoding Format	MPEG-2: MP@ML
Resolution & Frame Rate	480i@30fps, 576i@25fps
Aspect Ratio	4:3
Video Encoding Rate	1 to 7Mbps per program
Encoding Rate Mode	VBR, CBR
Audio Encoding
Encoding Format	MPEG-1 Layer 2
Operation Mode	Stereo or Mono
Supported Sample Rate	32 kHz, 44.1 kHz, 48 kHz
Audio Encoding Rate	64kbps to 384 kbps
Network Management
Interface	1 x 10/100 Base-T Ethernet
Connector	RJ-45
Management	Web and SNMP management
Miscellaneous
Front Panel	3.5’’ LCD with 6 x Control Button for 2-lines information display and settings
	3 x Dual color LED, for status indications of power, working and Alarm
Rear Panel	1 x Power Receptacle(AC Input)
	1 x Power switch
	1 x Serial Console Port(via RJ-45 connector)
Power Supply
Input Voltage	90 - 250 VAC, 50/60Hz
Power Consumption	50W (Typ.)
Environmental
Operating Temperature	0 to 45(32 to 113)
Storage Temperature	-20 to 80(-4 to 176)
Operating Humidity	90%, non condensing
Mechanical
You Might Also Like High Density 8 Channel IPTV MPEG-2 SD Encoder With IP ASI Output Related Searches: 8 Channel Dvr High Density Polyethylene High Density Board High Density Foam High Density Fabric 2 Channel Amplifier 2 Channel Speaker IPTV High Speed Sd Card High Speed Sd Show Post Buying Request Contact Supplier Sign In | Join Free About - Feedback -Terms - Privacy - Desktop View Copyright @ HiSupplier.com, All Rights Reserved