mud pump power end parts
| Place of Origin: | Shandong |
|---|
Company Profile
| Location: | Qingdao, Shandong, China (Mainland) |
|---|
Product Description
We manufacture and offer power end parts of triplex mud pumps for our clients all over the world. Power End includes frame, pinion shaft, crankshaft, crosshead and extension rod.
1.Power end features
Continuous tooth herringbone gear.
One-piece alloy steel crank.
Renewable crosshead guide.
The frame is made of welded steel plate to provide the frame with high strength, good rigidity and lightweight. The extension rod packing is of duplex seal structure to provide the good seal result. The power end uses the combined lubrication system of forced lubrication and splash lubrication.
One-piece alloy steel crank.
Renewable crosshead guide.
The frame is made of welded steel plate to provide the frame with high strength, good rigidity and lightweight. The extension rod packing is of duplex seal structure to provide the good seal result. The power end uses the combined lubrication system of forced lubrication and splash lubrication.
2.Frameļ¼
The frame is made of welded steel plate and by stress relief treatment to obtain good rigidity and high strength. Ribbed plates are used to strengthen the place where the crankshaft bearing is fitted. The frame is furnished with the necessary oil basin and oil way system for cooling and lubricating purpose.
The frame is made of welded steel plate and by stress relief treatment to obtain good rigidity and high strength. Ribbed plates are used to strengthen the place where the crankshaft bearing is fitted. The frame is furnished with the necessary oil basin and oil way system for cooling and lubricating purpose.
3.Crankshaft
The crankshaft is made of cast alloy steel and is furnished with big geared ring, connecting rod and bearing. The tooth form of the big-geared ring is herringbone gear. The gear bore and the crankshaft surface is interference fitted and they are both fastened with bolts and lock nuts. The big end of the connecting rod is mounted on three eccentric straps of the crankshaft through single row short cylindrical roller bearings and the small end on the crosshead pin through double row long cylindrical roller bearing. Double row radial spherical roller bearings are mounted at both ends of the crankshaft.
The crankshaft is made of cast alloy steel and is furnished with big geared ring, connecting rod and bearing. The tooth form of the big-geared ring is herringbone gear. The gear bore and the crankshaft surface is interference fitted and they are both fastened with bolts and lock nuts. The big end of the connecting rod is mounted on three eccentric straps of the crankshaft through single row short cylindrical roller bearings and the small end on the crosshead pin through double row long cylindrical roller bearing. Double row radial spherical roller bearings are mounted at both ends of the crankshaft.
4.Pinion shaft
Pinion shaft is made of forged alloy steel on which a herringbone gear with the medium-hard tooth surface is machined. For easy maintenance, the single row radial long cylindrical roller bearing with inner ring (without sides) is used. Both ends of the pinion shaft extend out, so that the sheave or the sprocket can be mounted on either end.
Pinion shaft is made of forged alloy steel on which a herringbone gear with the medium-hard tooth surface is machined. For easy maintenance, the single row radial long cylindrical roller bearing with inner ring (without sides) is used. Both ends of the pinion shaft extend out, so that the sheave or the sprocket can be mounted on either end.
5.Crosshead and Extension Rod
The crosshead and crosshead guide are made of ASTM A48-83 meehanite cast iron featured by good abrasion resistance and long service life. Upper and lower guides are used on F-800 and F-1000 mud pumps, so that the concentricity can be adjusted by adding shims beneath the lower guide. F-500 mud pump is the cylindrical structure. Bolted flange is used at the connection between the crosshead and the extension rod. The rigid connection ensures the concentricity of the crosshead and the extension rod. The coupling is used for connecting the extension rod to the piston rod. The lightweight coupling enables the extension rod and the piston rod to connect to each other easily and reliably.
The crosshead and crosshead guide are made of ASTM A48-83 meehanite cast iron featured by good abrasion resistance and long service life. Upper and lower guides are used on F-800 and F-1000 mud pumps, so that the concentricity can be adjusted by adding shims beneath the lower guide. F-500 mud pump is the cylindrical structure. Bolted flange is used at the connection between the crosshead and the extension rod. The rigid connection ensures the concentricity of the crosshead and the extension rod. The coupling is used for connecting the extension rod to the piston rod. The lightweight coupling enables the extension rod and the piston rod to connect to each other easily and reliably.
