Technical Parameters:
1,Applicable polyester monofilament: 0.10～0.5mm or
0.2mmx6 strands
2,Weft density range: 50～360 weft /10cm.Warp density range:
60～180 weft /10cm.
3,Denting breadth∶16m.
4,Economic
speed∶25 rev/min
5,Total motor power∶40.75KW.
6,Machine weight∶about
80T.
7,Overall dimensions∶Width23520×Depth6485×Height2600(mm).
Machine
structure:
1,Rack: Main wall panels in cast iron box type structure to
combine the whole machine, in a gap 1780mm
between two sets.
2,Main
driving: Dual-motor double-side coaxial drive, 11kw for each motor; dual
pneumatic clutch,
elliptical gear transmission for main transmission
case.
3,Weft Insertion: Hydraulic shooting-in, 2*2 shuttle box change or
weft section mechanism at two sides.
4,Shedding: Large blade type side pull
dobby at two sides, 16-pcs heald frame.
5,Beating-up: Multi-section
assembled crankshaft four-bar linkage for beating-up at variable speed, a
set
of cradle mechanism outside.
6,Take-up: Three-roller active
take-up under electronic control, with upper roll and lower roller driven
by
servomotor.
7,Temple mechanism: Ring temple plus side weft
control device, ring weaving temple plus side weft
control
device.
8,Warp let-off: Active let-off (by single warp beams, or beaming
in reels) under electronic control.
9,Winding: External surface take-up
driven by independent torque motor.
10,Lubrication System: Combined
automatic or manual feed of grease lubrication.
11,Control system: Computer
control system is available for free setting of parameters and
automatic
display of faults.
