Technical Parameters:
Applicable Scope of Polyester Monofilament:
1,Reed
width: 9m
2,Warp: Deformed flat polyester 1.06*0.25/0.58*0.38mm, polyester
monofilament 0.9mm, warp density
11-24picks/cm
3,Weft: 1.2mm,
0.35-0.9mm. Weft density 6.5-15 picks/cm
4,Revolving speed: 36
rev/min
Main Mechanisms:
1,Rack: With cast iron box-type structure of
main wall panel, the whole machine is combined by several
groups of split
wall panels.
2,Driving: Dual-motor coaxial drive, 18.5kw for each, dual
pneumatic clutch, main transmission case
gears made from special
materials, optimized gear parameters and drive ratio, increased
beating-up
force.
3,Weft Insertion: German servomotor, weft
insertion by double rapier, imported rapier head, matched with
imported
weft accumulator for cord thread.
4,Shedding: Large blade type side pull
dobby at two sides, 16-page heald frame.
5,Beating-up: Multi-section split
assembled crankshaft four-bar beating-up mechanism, with more
extra
beating-up points.
6,Take-up: Electronic active control for
take-up of mechanical worm gear reducer can ensure strength
and precision
of weaving while overcoming impulsion during beating-up.
7,Warp let-off:
Electronic active control for warp let-off of imported reducer, improving
rigidity of let-off
system by double beam and multiple-fulcrum
structure.
8,Winding: External center take-up or surface
take-up.
9,Lubrication System: Combined auto or manual feed of grease
lubrication.
10,Electrical Control: Computer control for the whole machine
is available for free setting of parameters,
automatic display of faults,
and infrared protection system for weaving.