Electric Wire Rope Hoist

Electric Wire Rope Hoist

• Type: Dual rail hoist trolley
• Usage: Material handling, metallurgy, mining, oil, petrochemical, etc
• Sling Type: Wire rope
• Maximum Lifting Weight: 16t
• Maximum Lifting Height: 30m 
• Lift Speed: 0.5~8m/min
• Power Source: 3P, 380V, 50HZ, other type also available
• Controler: Pendent control, remote control
• Certification: ISO9001:2008

Double Girder Hoist Trolley, Dual Rail Hoist Trolley, Wire Rope Electric Hoist Trolley for Double Girder, Twin Drive Crab Unit, Dual Rail Hoist Trolley

Double girder hoist trolley is composed with Girder frame, Crane travel device, and the trolley with lifting and moving device. There are Pave the rail for the trolley move on the main girder. Assemble the moving table on the outside of the two main girder, one side is prepare for assemble and maintenance the crane move device, another side is prepare for the assembly of the trolley conductor device. There are full field of view Cabin suspend under the main girder, there are joint control desk or single control box packed within the Cabin, assemble the sidelong ladder between the Cabin and moving table, The main girder joint with the two side end carriage which with the joint point in the middle.

Low Headroom Electric Wire Rope Hoist (4/1 rope reeving)

1. Efficient high lifting speed, smooth low lifting speed, precise positioning.

2. Humanization design of control pendant, high tensile seamless twisting sheath of control cable, optimize the operation to the utmost.                      

3. Novel design, compact structure.                                                                      

Higher Security and Reliability                                                                                                                      

1. Brake and clutch ensure the safety under any circumstance,no slip under load.

2. IP55 of hoist frame and brake ensures the optimal corrosion resistance under harsh environment.

3. Up and down limit switch ensures the safe operation of the hook on the top and bottom position.

4. Low voltage contactor ensures the safe and reliable operation.

Under the principle of "customer first", Nante Machinery sincerely welcome all friends from domestic and abroad.

1. Hooks

Load hooks are heat treated and fracture resistant. In case of dangerous overloading or abuse, the hook does not fracture but will slowly yield.

2. Power

Operating voltage 220-440V, 50/60Hz, 1-3 phase.

Low voltage control 36V is standard.

Dual voltage is available.

3. Motor

High efficient energy-saving motor, asbestos free brake system. dual-speed motor available.

Sturdy pole change motors with cylindrical rotors and integrated safety brakes.

4. Limit Switch

Limit switch devices fitted at both top & bottom ends, switch off power automatically to prevent load chain from running out.

5. Pushbutton Switch

Pushbutton switch is rain-proof plastic for severe impact and corrosive atmosphere resistance and mechanically interlocked.

6. Hoisting Gear:

 Lightweight gear units with silent running flat beveled gears deliver the torque required.

<