100M HDMI video EXTENDER by COAX. RG-6U BNC 1080P HDMI1.3c Fully HDCP Easy to install and simple to use

CB1 HDMI over Coax Extender Set is a HDMI extender using a single coaxial 

cable as transmission media. This enables easy HDMI installation over a long 

distance. Full High-Resolution HDTV signals are supported up to a resolution 

of 1080P at a maximum distance of 120 meter. Installer will also have the ability 

to customize the length by using this extender set. The system will auto adjust 

feedback, equalization and amplifier, the user does not need to care about the 

length of the cable.

Features: 

* Extends high definition HDMI compliant devices up to 120 meters.
* Supports resolution up to 1080P.  
* Works with HDMI 1.3c and HDCP compliant devices.
* Consumer Electronics Control (CEC).
* Supports xvYCC function.
* Extends range of HDMI by equalizing signals.
* Easy to install and simple to use.

Specifications:

* Video amplifier speed: 10.2 Gbps.
* Video amplifier bandwidth: 340MHz.
* Up to 36bit color depth.
* Input video signal: 1.2 Volts p-p.
* Input DDC signal: 5 Volts p-p (TTL).
* Connector I: HDMI type A 19-Pin female
* Connector II: BNC type.
* Power supply: DC5V/1A
* Dimension: 117.5 x 68 x 26.5mm
* Weight: 0.54KG/pcsx2

How does it work:

The transmitter unit sits close to a source, the receiver unit sits close to a HDTV display. 

Run a single coaxial cable between the transmitter and receiver. When the source, the 

transmitter, the receiver and the display are all powered on and connected, the auto-adjusting

 extender requires no manual turning or settings.

Packing Content: White Box

1. The HDMI over Coaxial transmitter
2. The HDMI over Coaxial receiver
3. DC5V 2A power supply.
4. User's manual.