Phos-Copper-Silver Brazing Alloys
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Jinhua, Zhejiang, China (Mainland) |
|---|
Product Detail
| Model No.: | BcuP-3 |
|---|
Product Description
Details:
1) Ag: 4.8-5.2%, P: 5.8-6.2%, Cu: Balance
2) Form: wire, rod, flat, square, spool, ring
Features:
1) Good fluency
2) Low cost
3) Perfect performance
4) For resistance brazing, gas flame brazing, high frequency
induction brazing and furnace brazing
5) Joint strength high and conductivity good
6) Flux is necessary when brazing copper or copper alloys
phos-copper-silver
7) Brazing alloys with low melting points have good 'wettabilty,'
high strength and toughness
8) Ramp rate should be as quick as possible while brazing
9) Joints become bright gray, returning to original copper color
once dipped into a 10% sulfuric solution
1) Ag: 4.8-5.2%, P: 5.8-6.2%, Cu: Balance
2) Form: wire, rod, flat, square, spool, ring
Features:
1) Good fluency
2) Low cost
3) Perfect performance
4) For resistance brazing, gas flame brazing, high frequency
induction brazing and furnace brazing
5) Joint strength high and conductivity good
6) Flux is necessary when brazing copper or copper alloys
phos-copper-silver
7) Brazing alloys with low melting points have good 'wettabilty,'
high strength and toughness
8) Ramp rate should be as quick as possible while brazing
9) Joints become bright gray, returning to original copper color
once dipped into a 10% sulfuric solution
.jpg)
