Precision Injection Multi Cavity Mould HOT Runner And 2 plate
| Place of Origin: | Zhejiang |
|---|
Company Profile
| Location: | Dongguan, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer |
| Main Products: | Plastic Injection Mould, Hot Runner Injection Mould, Cold Runner Mold |
Product Detail
| Model No.: | SY-090120 |
|---|
Product Description
Precision Injection Multi Cavity Mould HOT Runner And 2 plate
Quick Detail:
1. The part name: Medical instruments(plastic injection mold)
2. Plastic material: PP
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: SUB-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO, Customize according to customers' requirements.
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Applications:
Molding the plastic product by plastic injection machine
Description:
The part name: Medical instruments
Mold type: Plastic Injection Mould with HOT runner system
Locating ring Dimension: 100
Part Material: PP
Ejection type: ejection pins.
KO Pattern: 200*200
Sprue Radius: SR 19
Mold construction description: HOT runner system with SUB gate, 2 plates, 8sliders, and many shut off area. Many size tolerances are no more than +/-0.02mm,twice ejection with ejection pin and stripper plate, there is a very small long center pin in the product,which is very easy to be deform when molding,otherwise, this mold have 24 cav,we must ensure that the size of all mold component are consistent in mass production.
This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport, Sliver Marks, Gas Trap Effect, Visible Ejector Marks,Deformation,Short shot Filling, Burnt Streaks, Sink Marks,Flash,Over dimension, Under dimension, Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE B-2.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
1.name |
Medical instruments(plastic injection mold) |
|
Plastic material |
PP,PE,PA,PC,ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
24 |
|
7.runner |
HOT runner |
|
8.gate type |
SUB-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires. |
|
9.mould weight |
1220 kg |
|
10. mould base standard |
LKM Local standard, DME,HASCO,Customize according to customers' requirements |
|
11.cycle time |
30 second |
