Brief introduction:
FT206 TTB is
mounted on the horizontal side of the HPX67 MDF or DPSG67 MDF, and it is used
for termination between jumper wires and internal exchange lines. It is a
normally closed-type contact. When the disconnection plug is inserted into the
TTB, the internal lines and jumper wires will be disconnected. The test plug
with cord can be used to test internal lines and external lines independently.
The protection plug can be used to label and protect important or special
subscriber line. Each test TTB is of max capacity of 128 lines, consisting of 16
pieces of 8L modules.
Dimensions:
116(H)×240(W)×70(D)
.jpg)
.jpg)