3.5 inch COB LED Wall Wash Recessed Downlight

Description

3.5 inch LED recessed fixtures with round apertures offer energy-efficient, precision lighting for accent, task, or wall wash applications.
This type LED luminaire approximates the performance of 40W halogen, but at only 10-watts input, consumes just one-fourth the energy.
A feature enriched, small aperture downlight, featuring unique high-low lamp positioning feature, the innovative design allows the LED to be positioned closer to the aperture for maximum light output and efficiency or higher to minimize glare and flash on the trim.

Wall Wash Lighting

High performance wall wash with asymmetric distribution provides uniform illumination.
Allow for 358 degree rotation.
Trimless is available.

Features

Separable rotating reflector design makes it easy for replacement.
Provide unique high-low lamp positioning with the simple twist of a screwdriver.
Optimize the design of emergency power supply to ensure the battery life.
Power supply using isolation scheme, driver can achieve high power factor and conversion efficiency, constant current output.
Universal 120V-277V driver with optional 0-10V standard dimming protocol.

Housing

Heavy duty black powder coated 18 gauge steel frame.
Designed for New Construction installation
Housing can be installed in 2" thick ceilings
Housing types include IC Air-Tight or Non-IC Rated (must specify).
Junction box and driver are located on opposite ends of the housing, with easy access for maintenance and installation.

LED Light Engine

10W 15W 20W 25W
1100 Lumens Max.
2700K, 3000K, 3500K and 4100K 82 CRI
2700K and 3000K 90 CRI
LED mounted to die-cast / extruded aluminum heat sink w/ active cooling
50,000 hours average rated life at 70% output
LED light engine, SynJet and driver are all accessible from below the ceiling

Optics
12° Spot, 24° Narrow Flood and 36° Flood

Emergency
Remote test switch included.
Emergency driver operates LED load of up to 7.0 Watts at a maximum rated current (270 mA) for a minimum of 90 minutes.

Listing / Warranty
ETL listed to US and Canadian standards for damp location W/Feed through
10 Year Limited Warranty.

INSTALLATION
Housing types include IC Air-Tight, CCEA (Chicago Plenum), or Non-IC Rated (must specify). Non-IC rated housings must be kept at a minimum of 3" away from insulation.
Butterfly brackets and adjustable hanger bars (14"-25") with integral nail included.
Butterfly brackets are compatible with C-channel, flat bar hanger and EMT. C-channel is recommended for T-bar ceilings.
C-Channel and flat C-Channel and flat bar hangers must be ordered separately.

PACKAGE
CTN Size: 490*390*223mm
1 PCS/CTN