MISUMI standard mold spring
| Payment Terms: | T/T |
|---|---|
| Place of Origin: | Guangdong |
Company Profile
| Location: | Dongguan, Guangdong, China (Mainland) |
|---|---|
| Business Type: | Manufacturer, Trading Company, Distributor/Wholesaler |
| Main Products: | Punch Ejector Pin |
Product Description
MISUMI standard mold spring
Material | 60Si2MnA,60Si2CrA,60Si2CrV,etc |
Wire diameter | 5mm~80mm |
Free hight | 10mm~1188mm |
hardness | 42HRC~52HRC |
Direction of coils | Right, left |
Total coils | Deted By Drawing / Data. |
Load Bearing Capacity | Yellow( Lightest Load ) Blue(Light Load ) Red(Medium Load ) Green(Heavy Load) Brown(EX-Heavy Load) |
Application | Excavator, digger machine, car, train, shakeout machine,Steel Plants,Railway Bogies & Wagons,,etc. |
Painting and Coating | Amino paint,Synthetic Enamel Paint, Powder Coating, Phosphate, Zinc Coating etc. |
Color | yellow blue red green Brown |
Production method | Hot formed, cold formed |
Note | The materials and specifications can be dedided by the customers. |
Choose right compression of die spring or will distortion and reduce service life.
Can't have gap between upper plate and die spring or will distortion and rupture.
When free length of die spring is 4 times to outer diameter ,please use guide rod shield to protect service life.
Can't use it for anything except compression .
Please use it on the mould.
When the lower plate parallelism is not well, high stress will happen and cause transformation and rupture .
It must be have some preloading when put die spring on the mould . preventing mould Bear impact load and cause fatigue damage.
